Onkyo Comprehensive TX-SR508 Specifications and Features

Page 60

Specifications

Amplifier Section

Rated Output Power

All channels: (North American)

80 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.08% (FTC) 90 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.7% (FTC)

100 watts minimum continuous power per channel, 6 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.1% (FTC)

(Others)

7 ch 130 W at 6 ohms, 1 kHz, 1 ch driven (IEC)

Maximum Effective Output Power (Asian)

7 ch 160 W at 6 ohms, 1 kHz, 1 ch driven

 

(JEITA)

Dynamic Power

180 W (3 , Front)

 

160 W (4 , Front)

 

100 W (8 , Front)

THD (Total Harmonic Distortion)

 

(North American)

 

0.08% (Power Rated)

 

(Others)

 

0.08% (1 kHz, 1 W)

Damping Factor

60 (Front, 1 kHz, 8 )

Input Sensitivity and Impedance

200 mV/47 k(LINE)

Output Level and Impedance

200 mV/2.2 k(REC OUT)

Frequency Response 5 Hz - 100 kHz/+1 dB, -3 dB (DSP bypass)

Tone Control Characteristics

 

±10 dB, 50 Hz (BASS)

 

±10 dB, 20 kHz (TREBLE)

Signal to Noise Ratio

106 dB (LINE, IHF-A)

Speaker Impedance

(North American) 6 - 16

 

(Others) 4 - 16

Video Section

Input Sensitivity/Output Level and Impedance

1 Vp-p/75 (Component Y)

0.7Vp-p/75 (Component PB/CB, PR/CR) 1 Vp-p/75 (Composite)

Component Video Frequency Response

5 Hz - 100 MHz/+0 dB, -3 dB

Tuner Section

FM Tuning Frequency Range

(North American) 87.5 MHz - 107.9 MHz

(European) 87.50 MHz - 108.00 MHz,

RDS

(Others) 87.5 MHz - 108.0 MHz, RDS

AM Tuning Frequency Range

 

(North American) 530 kHz - 1710 kHz

 

(Others) 522/530 kHz - 1611/1710 kHz

Preset Channel

40

Digital Tuner (North American models)

SIRIUS

En

General

Power Supply

(North American) AC 120 V, 60 Hz

 

(European) AC 230 V, 50 Hz

 

(Others) AC 220 - 240 V, 50/60 Hz

Power Consumption

(North American) 4.9 A

 

(European) 450 W

 

(Others) 500 W

Stand-by Power Consumption

 

(North American) 0.2 W

 

(Others) 0.3 W

Dimensions

435 mm 151.5 mm 328.5 mm

(W H D)

17-1/8" 5-15/16" 12-15/16"

Weight

(North American)

 

8.6 kg (19.0 lbs.)

 

(Others)

 

9.4 kg (20.7 lbs.)

HDMI

 

Input

IN 1, IN 2, IN 3, IN 4

Output

OUT

Video Resolution

1080p

Audio Format

Dolby True HD, DTS Master Audio,

 

DVD-Audio, DSD

Supported

3D, Audio Return Channel, Deep Color,

 

x.v.Color, LipSync, CEC

Video Inputs

 

Component

IN 1, IN 2

Composite

BD/DVD, VCR/DVR, CBL/SAT, GAME,

 

AUX

Video Outputs

 

Component

OUT

Composite

MONITOR OUT, VCR/DVR OUT

Audio Inputs

 

Digital

Optical: 2

 

Coaxial: 2

Analog

BD/DVD, VCR/DVR, CBL/SAT, GAME,

 

TV/CD, AUX

Audio Outputs

 

Analog

VCR/DVR, ZONE2 Line Out

Subwoofer Pre Output

 

 

1

Speaker Outputs

Main (L, R, C, SL, SR, SBL, SBR)

 

+ ZONE2 / Front High (L, R)

Phones

1 (6.3 ø)

Others

Mic1

Universal Port

1

RI1

Specifications and features are subject to change without notice.

60

Image 60
Contents TX-SR508 Always consider the environmental issues and follow 10 cm 4 at the rear. The rear edge of the shelf orBoard above the apparatus shall be set 10 cm Away from the rear panel or wall, creating a flue-likePrecautions Supplied Accessories Using the Remote ControllerInstalling the Batteries Aiming the Remote ControllerContents Features AmplifierProcessing MiscellaneousFront & Rear Panels Front PanelPower cord UREMOTE Control jackDisplay Rear PanelRemote Controller Controlling the AV ReceiverReturn button Controlling the tunerAbout Home Theater Enjoying Home TheaterConnecting the AV Receiver Connecting Your SpeakersSpeaker Configuration Speaker Connection PrecautionsConnecting the Speaker Cables Screw-type speaker terminals Strip 1/2 to 5/8 12 to 15 mmInsulation from the ends Connecting a Powered Subwoofer Bi-amping the Front SpeakersAbout AV Connections Connected image with AV componentsAV Cables and Jacks Hdmi cableConnecting Components with Hdmi Jack Signal ComponentsAudio return channel ARC function Connecting External Components How to record the videoJack Signal Components Assignable Using the AUX Input jacks on the front panel Connecting Onkyo uComponentsSystem On/Auto Power On Remote ControlConnecting Antenna North American models European and Asian modelsAssembling the AM loop antenna On-screen setup menus are displayed when Depends on the Audio TV OUT settingWhich Connections Should I Use? Video Connection FormatsTurning On/Off the AV Receiver Turning OnTurning Off Using the Music Optimizer Setting the Display BrightnessBasic Operations Playing the Connected ComponentUsing the Sleep Timer Using HeadphonesMuting the AV Receiver Changing the Input DisplayAudyssey 2EQ Room Correction Speaker Setup Using Audyssey 2EQError Messages Changing the Speaker Settings ManuallyUsing a Powered Subwoofer Using the Tuner Tuning into Radio StationsListening to the Radio Listening to the RadioPresetting FM/AM Stations Using RDS excluding North American modelsFinding Stations by Type PTY Listening to Traffic News TPRDS program types PTY Connecting a Recording Component RecordingRecording Separate AV Sources AV RecordingUsing the Listening Modes Listening Mode ButtonsSelecting Listening Modes About Listening Modes Explanatory NotesInput Source Speaker LayoutListening Modes Resolution Audio DTS-HD MasterDTS Express DSD *7Onkyo-Original DSP Listening Modes Advanced Setup On-screen Setup MenusCommon Procedures in Setup Menu Hdmi Input Component Component Video InputDigital Audio Digital Audio Input SubwooferSp Config Speaker Configuration FrontSurrBack Ch Crossover Crossover FrequencyAudio Adjust Multiplex/Mono SettingsSp Distance Speaker Distance Dolby Settings DTS SettingAudyssey Settings Dynamic Volume Dynamic EQReference Level Theater-Dimensional Setting Speaker SettingsName Edit HardwareHdmi Setup Remote Control SettingsFM/AM Frequency Setup Settings Sirius Settings North American modelsPower Control Hdmi Control RihdAudio Return Ch ARC TV ControlUsing the Audio Settings Tone Control SettingsSpeaker Levels Late Night FunctionCinemaFILTER Audio SelectorSync Digital Input Signal Formats Adjusting the Bass & TrebleBass Treble Connecting Zone Connecting Your Zone 2 Speakers Directly to the AV receiverConnecting Your Zone 2 Speakers to an Amp in Zone ZoneSetting the Powered Zone Using Zone Controlling Zone 2 from the AV receiverFront High or ZONE2 L/R speaker ter Controlling Zone 2 with the Remote Controller Adjusting the Volume for ZoneOperating with the remote controller Muting ZonesConnecting an Onkyo Dock Controlling iPodModels sold are different depending on the region Onkyo Dock CableUsing the Onkyo Dock UP-A1 DockControlling Your iPod RI DockWithout the RI Control With the RI ControlAvailable buttons Preprogrammed Remote Control Codes Entering Remote Control CodesRemote Control Codes for Onkyo Components Connected via u Controlling Other ComponentsResetting Remote Mode Buttons Resetting the Remote ControllerYou can reset the remote controller to its default settings Controlling Other ComponentsCassettetape deck TV VOL q/wNumber +10 CH + Disc +Troubleshooting Standby indicator flashes redCan’t turn on the AV receiver There’s no sound, or it’s very quietThere’s no sound with a certain signal format Volume cannot be set toAbout DTS signals Can’t select the Pure Audio listening modeRemote controller doesn’t work AV receiver’s remote controller doesn’t control your iPodThere’s no picture from a source connected to an Hdmi On-screen menus don’t appearSound changes when I connect my headphones Can’t recordDisplay doesn’t work How do I change the language of a multiplex sourceSpecifications Amplifier SectionVideo Section Tuner SectionAbout Hdmi Supported Audio FormatsAbout Copyright Protection Using an RIHD-compatible TV, Player, or Recorder About p-compatible componentsOperations that can be performed with p connection How to connect and setup Confirm the connecting and settingConfirm the settings Operate with the remote controllerOnkyo Europe Electronics GmbH Onkyo Europe Electronics GmbH UK Branch

TX-SR508 specifications

The Onkyo TX-SR508 is a versatile home theater receiver designed for audiophiles looking to enhance their audio-visual experience. This model stands out in its class due to its combination of advanced features, high-quality build, and user-friendly operation.

One of the primary features of the TX-SR508 is its capability to decode multiple high-definition audio formats. Supporting Dolby TrueHD and DTS-HD Master Audio, the receiver ensures that users enjoy a cinematic sound experience, delivering a clear and immersive audio performance. Additionally, it offers Dolby Pro Logic IIz, which enhances the surround sound experience by adding front height channels, enriching the overall soundstage.

The TX-SR508 is equipped with a powerful amplifier that provides 75 watts per channel across seven channels, ensuring that it can adequately drive a full home theater speaker setup. With impedance options of 4 to 16 ohms, it is versatile enough to work with a variety of speaker systems.

Connectivity is another strong suit of the Onkyo TX-SR508. It features multiple HDMI inputs, enabling users to connect various high-definition devices, such as Blu-ray players, gaming consoles, and streaming devices. The HDMI 1.4a standard used in this receiver supports 3D video pass-through, making it future-proof for the current generation of home theater setups.

For those who still enjoy traditional sources, it includes analog audio inputs, as well as a phono input for connecting a turntable, catering to vinyl enthusiasts. The built-in AM/FM tuner and the capability to connect to an external internet radio enrich the listening options available to users.

Integrated technologies such as Audyssey 2EQ speaker calibration assist in optimizing sound for the room environment, providing a balanced audio experience regardless of the room's acoustics. The receiver also boasts an intuitive graphical user interface, making setup and navigation straightforward for users of all levels.

Overall, the Onkyo TX-SR508 combines cutting-edge audio technologies, extensive connectivity options, and practical features, making it a solid choice for anyone looking to build or upgrade their home theater system. Whether enjoying a movie, gaming, or listening to music, the TX-SR508 ensures an impressive performance, grounded in both quality and versatility.