Onkyo TX-SR508 instruction manual About Hdmi, Supported Audio Formats, About Copyright Protection

Page 61

About HDMI

Designed to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface standard for connecting TVs, projectors, Blu-ray Disc players/DVD players, set-top boxes, and other video components. Until now, several separate video and audio cables have been required to connect AV components. With HDMI, a single cable can carry control signals, digital video, and up to eight channels of digital audio (2-channel PCM, multichannel digital audio, and multichannel PCM).

The HDMI video stream (i.e., video signal) is compatible with DVI (Digital Visual Interface)*1, so TVs and displays with a DVI input can be connected by using an HDMI-to-DVI adapter cable. (This may not work with some TVs and displays, resulting in no picture.)

The AV receiver uses HDCP (High-bandwidth Digital Content Protection)*2, so only HDCP-compatible components can display the picture.

The AV receiver’s HDMI interface is based on the following:

Audio Return Channel, 3D, x.v.Color, Deep Color, Lip Sync, DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby TrueHD, Dolby Digital Plus, DSD and Multichannel PCM

Supported Audio Formats

•2-channel linear PCM (32–192 kHz, 16/20/24 bit)

•Multichannel linear PCM (up to 7.1 ch, 32–192 kHz, 16/20/24 bit)

•Bitstream (DSD, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD High Resolution Audio, DTS-HD Master Audio)

Your Blu-ray Disc player/DVD player must also support HDMI output of the above audio formats.

About Copyright Protection

The AV receiver supports HDCP (High-bandwidth Digital Content Protection)*2, a copy-protection system for digital video signals. Other devices connected to the AV receiver via HDMI must also support HDCP.

*1 DVI (Digital Visual Interface): The digital display interface standard set by the DDWG*3 in 1999.

*2 HDCP (High-bandwidth Digital Content Protection): The video encryption technology developed by Intel for HDMI/DVI. It’s designed to protect video content and requires a HDCP-compatible device to display the encrypted video.

*3 DDWG (Digital Display Working Group): Lead by Intel, Compaq, Fujitsu, Hewlett Packard, IBM, NEC, and Silicon Image, this open industry group’s objective is to address the industry’s requirements for a digital connectivity specification for high-performance PCs and digital displays.

Note

•The HDMI video stream is compatible with DVI (Digital Visual Interface), so TVs and displays with a DVI input can be connected by using an HDMI-to-DVI adapter cable. (Note that DVI connections only carry video, so you’ll need to make a separate connection for audio.) However, reliable operation with such an adapter is not guaranteed. In addition, video signals from a PC are not supported.

•The HDMI audio signal (sampling rate, bit length, etc.) may be restricted by the connected source component. If the picture is poor or there’s no sound from a component connected via HDMI, check its setup. Refer to the connected component’s instruction manual for details.

En

61

Page 60 Page 62
Image 61
Page 60 Page 62
Contents TX-SR508 10 cm 4 at the rear. The rear edge of the shelf or Always consider the environmental issues and followBoard above the apparatus shall be set 10 cm Away from the rear panel or wall, creating a flue-likePrecautions Using the Remote Controller Supplied AccessoriesInstalling the Batteries Aiming the Remote ControllerContents Amplifier FeaturesProcessing MiscellaneousFront Panel Front & Rear PanelsUREMOTE Control jack Power cordDisplay Rear PanelControlling the AV Receiver Remote ControllerReturn button Controlling the tunerEnjoying Home Theater About Home TheaterConnecting Your Speakers Connecting the AV ReceiverSpeaker Configuration Speaker Connection PrecautionsScrew-type speaker terminals Strip 1/2 to 5/8 12 to 15 mm Connecting the Speaker CablesInsulation from the ends Bi-amping the Front Speakers Connecting a Powered SubwooferConnected image with AV components About AV ConnectionsAV Cables and Jacks Hdmi cableJack Signal Components Connecting Components with HdmiAudio return channel ARC function How to record the video Connecting External ComponentsJack Signal Components Assignable Connecting Onkyo uComponents Using the AUX Input jacks on the front panelSystem On/Auto Power On Remote ControlNorth American models European and Asian models Connecting AntennaAssembling the AM loop antenna Depends on the Audio TV OUT setting On-screen setup menus are displayed whenWhich Connections Should I Use? Video Connection FormatsTurning On Turning On/Off the AV ReceiverTurning Off Setting the Display Brightness Using the Music OptimizerBasic Operations Playing the Connected ComponentUsing Headphones Using the Sleep TimerMuting the AV Receiver Changing the Input DisplayUsing Audyssey 2EQ Audyssey 2EQ Room Correction Speaker SetupChanging the Speaker Settings Manually Error MessagesUsing a Powered Subwoofer Tuning into Radio Stations Using the TunerListening to the Radio Listening to the RadioUsing RDS excluding North American models Presetting FM/AM StationsListening to Traffic News TP Finding Stations by Type PTYRDS program types PTY Recording Connecting a Recording ComponentRecording Separate AV Sources AV RecordingListening Mode Buttons Using the Listening ModesSelecting Listening Modes Explanatory Notes About Listening ModesInput Source Speaker LayoutListening Modes DTS-HD Master Resolution AudioDTS Express DSD *7Onkyo-Original DSP Listening Modes On-screen Setup Menus Advanced SetupCommon Procedures in Setup Menu Component Component Video Input Hdmi InputDigital Audio Digital Audio Input SubwooferFront Sp Config Speaker ConfigurationSurrBack Ch Crossover Crossover FrequencyMultiplex/Mono Settings Audio AdjustSp Distance Speaker Distance DTS Setting Dolby SettingsAudyssey Settings Dynamic EQ Dynamic VolumeReference Level Speaker Settings Theater-Dimensional SettingName Edit HardwareRemote Control Settings Hdmi SetupFM/AM Frequency Setup Settings Sirius Settings North American modelsHdmi Control Rihd Power ControlAudio Return Ch ARC TV ControlTone Control Settings Using the Audio SettingsSpeaker Levels Late Night FunctionAudio Selector CinemaFILTERSync Adjusting the Bass & Treble Digital Input Signal FormatsBass Treble Connecting Your Zone 2 Speakers Directly to the AV receiver Connecting ZoneConnecting Your Zone 2 Speakers to an Amp in Zone ZoneControlling Zone 2 from the AV receiver Setting the Powered Zone Using ZoneFront High or ZONE2 L/R speaker ter Adjusting the Volume for Zone Controlling Zone 2 with the Remote ControllerOperating with the remote controller Muting ZonesControlling iPod Connecting an Onkyo DockModels sold are different depending on the region Onkyo Dock CableUP-A1 Dock Using the Onkyo DockRI Dock Controlling Your iPodWithout the RI Control With the RI ControlAvailable buttons Entering Remote Control Codes Preprogrammed Remote Control CodesRemote Control Codes for Onkyo Components Connected via u Controlling Other ComponentsResetting the Remote Controller Resetting Remote Mode ButtonsYou can reset the remote controller to its default settings Controlling Other ComponentsTV VOL q/w Cassettetape deckNumber +10 CH + Disc +Standby indicator flashes red TroubleshootingCan’t turn on the AV receiver There’s no sound, or it’s very quietVolume cannot be set to There’s no sound with a certain signal formatAbout DTS signals Can’t select the Pure Audio listening modeAV receiver’s remote controller doesn’t control your iPod Remote controller doesn’t workThere’s no picture from a source connected to an Hdmi On-screen menus don’t appearCan’t record Sound changes when I connect my headphonesDisplay doesn’t work How do I change the language of a multiplex sourceAmplifier Section SpecificationsVideo Section Tuner SectionSupported Audio Formats About HdmiAbout Copyright Protection About p-compatible components Using an RIHD-compatible TV, Player, or RecorderOperations that can be performed with p connection Confirm the connecting and setting How to connect and setupConfirm the settings Operate with the remote controllerOnkyo Europe Electronics GmbH UK Branch Onkyo Europe Electronics GmbH

TX-SR508 specifications

The Onkyo TX-SR508 is a versatile home theater receiver designed for audiophiles looking to enhance their audio-visual experience. This model stands out in its class due to its combination of advanced features, high-quality build, and user-friendly operation.

One of the primary features of the TX-SR508 is its capability to decode multiple high-definition audio formats. Supporting Dolby TrueHD and DTS-HD Master Audio, the receiver ensures that users enjoy a cinematic sound experience, delivering a clear and immersive audio performance. Additionally, it offers Dolby Pro Logic IIz, which enhances the surround sound experience by adding front height channels, enriching the overall soundstage.

The TX-SR508 is equipped with a powerful amplifier that provides 75 watts per channel across seven channels, ensuring that it can adequately drive a full home theater speaker setup. With impedance options of 4 to 16 ohms, it is versatile enough to work with a variety of speaker systems.

Connectivity is another strong suit of the Onkyo TX-SR508. It features multiple HDMI inputs, enabling users to connect various high-definition devices, such as Blu-ray players, gaming consoles, and streaming devices. The HDMI 1.4a standard used in this receiver supports 3D video pass-through, making it future-proof for the current generation of home theater setups.

For those who still enjoy traditional sources, it includes analog audio inputs, as well as a phono input for connecting a turntable, catering to vinyl enthusiasts. The built-in AM/FM tuner and the capability to connect to an external internet radio enrich the listening options available to users.

Integrated technologies such as Audyssey 2EQ speaker calibration assist in optimizing sound for the room environment, providing a balanced audio experience regardless of the room's acoustics. The receiver also boasts an intuitive graphical user interface, making setup and navigation straightforward for users of all levels.

Overall, the Onkyo TX-SR508 combines cutting-edge audio technologies, extensive connectivity options, and practical features, making it a solid choice for anyone looking to build or upgrade their home theater system. Whether enjoying a movie, gaming, or listening to music, the TX-SR508 ensures an impressive performance, grounded in both quality and versatility.
Top Page Image Contents