Onkyo TX-SR508 Connecting Antenna, North American models European and Asian models

Page 18

Connecting Antenna

This section explains how to connect the supplied indoor FM antenna and AM loop antenna.

The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner.

North American models

European and Asian models

Insert the plug fully into the jack.

Insert the plug fully

 

 

 

into the jack.

Push.

Insert wire.

Release.

 

Assembling the AM loop antenna

Thumbtacks, etc.

Indoor FM antenna (supplied)

AM loop antenna (supplied)

Caution

• Be careful that you don’t injure yourself when using thumbtacks.

Note

Once your AV receiver is ready for use, you’ll need to tune into a radio station and position the antenna to achieve the best possible reception.

Keep the AM loop antenna as far away as possible from your AV receiver, TV, speaker cables, and power cords.

Tip

If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available outdoor FM antenna instead.

If you cannot achieve good reception with the supplied indoor AM loop antenna, try using it with a commercially available outdoor AM antenna.

En

18

Image 18
Contents TX-SR508 Board above the apparatus shall be set 10 cm Always consider the environmental issues and follow10 cm 4 at the rear. The rear edge of the shelf or Away from the rear panel or wall, creating a flue-likePrecautions Installing the Batteries Supplied AccessoriesUsing the Remote Controller Aiming the Remote ControllerContents Processing FeaturesAmplifier MiscellaneousFront & Rear Panels Front PanelDisplay Power cordUREMOTE Control jack Rear PanelReturn button Remote ControllerControlling the AV Receiver Controlling the tunerAbout Home Theater Enjoying Home TheaterSpeaker Configuration Connecting the AV ReceiverConnecting Your Speakers Speaker Connection PrecautionsConnecting the Speaker Cables Screw-type speaker terminals Strip 1/2 to 5/8 12 to 15 mmInsulation from the ends Connecting a Powered Subwoofer Bi-amping the Front SpeakersAV Cables and Jacks About AV ConnectionsConnected image with AV components Hdmi cableConnecting Components with Hdmi Jack Signal ComponentsAudio return channel ARC function Connecting External Components How to record the videoJack Signal Components Assignable System On/Auto Power On Using the AUX Input jacks on the front panelConnecting Onkyo uComponents Remote ControlConnecting Antenna North American models European and Asian modelsAssembling the AM loop antenna Which Connections Should I Use? On-screen setup menus are displayed whenDepends on the Audio TV OUT setting Video Connection FormatsTurning On/Off the AV Receiver Turning OnTurning Off Basic Operations Using the Music OptimizerSetting the Display Brightness Playing the Connected ComponentMuting the AV Receiver Using the Sleep TimerUsing Headphones Changing the Input DisplayAudyssey 2EQ Room Correction Speaker Setup Using Audyssey 2EQError Messages Changing the Speaker Settings ManuallyUsing a Powered Subwoofer Listening to the Radio Using the TunerTuning into Radio Stations Listening to the RadioPresetting FM/AM Stations Using RDS excluding North American modelsFinding Stations by Type PTY Listening to Traffic News TPRDS program types PTY Recording Separate AV Sources Connecting a Recording ComponentRecording AV RecordingUsing the Listening Modes Listening Mode ButtonsSelecting Listening Modes Input Source About Listening ModesExplanatory Notes Speaker LayoutListening Modes DTS Express Resolution AudioDTS-HD Master DSD *7Onkyo-Original DSP Listening Modes Advanced Setup On-screen Setup MenusCommon Procedures in Setup Menu Digital Audio Digital Audio Input Hdmi InputComponent Component Video Input SubwooferSurrBack Ch Sp Config Speaker ConfigurationFront Crossover Crossover FrequencyAudio Adjust Multiplex/Mono SettingsSp Distance Speaker Distance Dolby Settings DTS SettingAudyssey Settings Dynamic Volume Dynamic EQReference Level Name Edit Theater-Dimensional SettingSpeaker Settings HardwareFM/AM Frequency Setup Settings Hdmi SetupRemote Control Settings Sirius Settings North American modelsAudio Return Ch ARC Power ControlHdmi Control Rihd TV ControlSpeaker Levels Using the Audio SettingsTone Control Settings Late Night FunctionCinemaFILTER Audio SelectorSync Digital Input Signal Formats Adjusting the Bass & TrebleBass Treble Connecting Your Zone 2 Speakers to an Amp in Zone Connecting ZoneConnecting Your Zone 2 Speakers Directly to the AV receiver ZoneSetting the Powered Zone Using Zone Controlling Zone 2 from the AV receiverFront High or ZONE2 L/R speaker ter Operating with the remote controller Controlling Zone 2 with the Remote ControllerAdjusting the Volume for Zone Muting ZonesModels sold are different depending on the region Connecting an Onkyo DockControlling iPod Onkyo Dock CableUsing the Onkyo Dock UP-A1 DockWithout the RI Control Controlling Your iPodRI Dock With the RI ControlAvailable buttons Remote Control Codes for Onkyo Components Connected via u Preprogrammed Remote Control CodesEntering Remote Control Codes Controlling Other ComponentsYou can reset the remote controller to its default settings Resetting Remote Mode ButtonsResetting the Remote Controller Controlling Other ComponentsNumber +10 Cassettetape deckTV VOL q/w CH + Disc +Can’t turn on the AV receiver TroubleshootingStandby indicator flashes red There’s no sound, or it’s very quietAbout DTS signals There’s no sound with a certain signal formatVolume cannot be set to Can’t select the Pure Audio listening modeThere’s no picture from a source connected to an Hdmi Remote controller doesn’t workAV receiver’s remote controller doesn’t control your iPod On-screen menus don’t appearDisplay doesn’t work Sound changes when I connect my headphonesCan’t record How do I change the language of a multiplex sourceVideo Section SpecificationsAmplifier Section Tuner SectionAbout Hdmi Supported Audio FormatsAbout Copyright Protection Using an RIHD-compatible TV, Player, or Recorder About p-compatible componentsOperations that can be performed with p connection Confirm the settings How to connect and setupConfirm the connecting and setting Operate with the remote controllerOnkyo Europe Electronics GmbH Onkyo Europe Electronics GmbH UK Branch

TX-SR508 specifications

The Onkyo TX-SR508 is a versatile home theater receiver designed for audiophiles looking to enhance their audio-visual experience. This model stands out in its class due to its combination of advanced features, high-quality build, and user-friendly operation.

One of the primary features of the TX-SR508 is its capability to decode multiple high-definition audio formats. Supporting Dolby TrueHD and DTS-HD Master Audio, the receiver ensures that users enjoy a cinematic sound experience, delivering a clear and immersive audio performance. Additionally, it offers Dolby Pro Logic IIz, which enhances the surround sound experience by adding front height channels, enriching the overall soundstage.

The TX-SR508 is equipped with a powerful amplifier that provides 75 watts per channel across seven channels, ensuring that it can adequately drive a full home theater speaker setup. With impedance options of 4 to 16 ohms, it is versatile enough to work with a variety of speaker systems.

Connectivity is another strong suit of the Onkyo TX-SR508. It features multiple HDMI inputs, enabling users to connect various high-definition devices, such as Blu-ray players, gaming consoles, and streaming devices. The HDMI 1.4a standard used in this receiver supports 3D video pass-through, making it future-proof for the current generation of home theater setups.

For those who still enjoy traditional sources, it includes analog audio inputs, as well as a phono input for connecting a turntable, catering to vinyl enthusiasts. The built-in AM/FM tuner and the capability to connect to an external internet radio enrich the listening options available to users.

Integrated technologies such as Audyssey 2EQ speaker calibration assist in optimizing sound for the room environment, providing a balanced audio experience regardless of the room's acoustics. The receiver also boasts an intuitive graphical user interface, making setup and navigation straightforward for users of all levels.

Overall, the Onkyo TX-SR508 combines cutting-edge audio technologies, extensive connectivity options, and practical features, making it a solid choice for anyone looking to build or upgrade their home theater system. Whether enjoying a movie, gaming, or listening to music, the TX-SR508 ensures an impressive performance, grounded in both quality and versatility.