RESOLUTION | Resolution notifier activity. |
NOTIFIER | Factory setting: OFF |
Information | Provide information about resolution, H/V frequencies, | |
and polarity of the input signal. | ||
|
This OSD informs the user the current signal that is
displayed.
Input Select
This OSD will automatically turn off after 2 seconds or by pressing the “Exit” key.
| This OSD gives a warning when the selected input | |
OSD Warnings signal is not active. After power on or when the input | ||
NO SIGNAL | signal become inactive, this warning appears. | |
No signal OSD shall be shown after around 0.5sec from | ||
| ||
| video mode detection. This OSD shall be turned off | |
| after 5 seconds automatically, or by “EXIT” key. Then | |
LB2650W User’s Guide | 15 |