Planar LB2650W OSD Lock Out Function, Press Exit Key + Menu Key + Soft power key at same time

OSD Lock Out Function

The OSD Lock Function allows you to lock out the OSD menu and the button keys.

To activates the OSD lock function, the monitor must be in a normal display mode and the information menu as shown in fig-2-4 must be activated. Then follow the instructions below.

Figure 2-4

Option 1: OSD lock – all buttons be locked except the “POWER” button.

Press “Exit Key + Menu Key + Soft power key” at same time

The monitor will show an “OSD Lock Out” message, showing time as “OSD TURN OFF” setting, and the message be show again by any button, also any button exit this message, but “Power” button be turn off / on monitor.

Only repeat this step to unlock.

Option 2: OSD & Power button lock – all buttons including “POWER” button be locked.

Press “Exit Key + Menu Key + Up key” at same time

The monitor will show an “OSD Lock Out” message, showing time as “OSD TURN OFF” setting, and the message be show again by any button, also any button exit this message, but “Power” button no action.

Only repeat this step to unlock.

LB2650W User’s Guide (020-0973-00 Rev. A) 17