Introduction
About Planar’s LB2650W
The LB2650W products all have a 26" diagonal flat panel screen with an active matrix,
Features include:
❑Dual signal input: Analog VGA and Digital DVI (future models will also include an additional DVI port).
❑Active matrix TFT LCD technology
❑1920 x 1200 WUXGA resolution
❑5 ms GTG response time
❑26" viewable display area
❑31 ~ 93 kHz horizontal scan
❑50 ~ 76 Hz vertical refresh rate
❑0.2865mm pixel pitch
❑400 cd/m2(typ.) brightness
❑178° H, V viewing angle, CR=5
❑CCFL backlight lamps
❑
❑User controls
❑Power saving
The LB2650W monitor has been designed to assist OEM customers with forward compatibility concerns. This product is designed to provide consistent X,Y, and Z mounting points and power input requirements. Customers are requested to only utilize Planar recommended mounting points contained on the products mounting brackets to ensure forward compatibility. OEM customers are reminded that connector location may change within the “component envelope”- therefore allow additional slack in your cable lengths and route cables inside your enclosure
to ensure that your design will allow for changes in exact connector location. Finally, ensure that your systems power budget is adequate to allow up to 20% additional power draw should the efficiency of this product change during its product life.
LB2650W User’s Guide | 5 |