Planar LC1200R user manual Display Cosmetics, Regulatory Agency Requirements

Page 24

White color is concentrated around 5600ºK color temperature.

8 Display Cosmetics

The external visual inspection shall be conducted with the unaided eye at a minimum of 35 cm [14in] from the display surface. There are acceptable defects when the display is in the black mode and in the white mode.

8.1Black Display Picture Mode

Power up the Monitor. Display an all black screen via the video input.

The LCD Panel is acceptable if there are 4 or less green, red, and blue dots visible from 35cm [14in] with the unaided eye.

The LCD Panel is acceptable if no more than 5 dots are joined.

8.2White Display Picture Mode

Power up the Monitor. Display an all white screen via the video input.

The LCD panel is acceptable if there are 4 or less black dots visible from 35c [14in] with the unaided eye.

The LCD panel is acceptable if no more than 3 dots are joined.

9 Regulatory Agency Requirements

9.1Safety Certification

The LC1200R does not inhibit customer from certifying product to the following safety standards:

UL 1950/CAN/CSA C22.2 No. 950-95 Safety of Information Technology, including electrical business equipment

EN 60950 Safety of Information Technology, including electrical business equipment.

9.2CE Marking

(Declaration according to ISO/IEC Guide 22 and EN45014)

The LC1200R does not inhibit customer from conforming to the following EC Directives:

Council Directive 73/23/EEC and 93/68/EEC (latest amendment) on the harmonization of the laws of the Member States relating to electrical equipment designed for use within certain voltage limits is based on compliance with the following harmonized standards:

EN 60950 June 2000

EN 41003:1991

LC1200R User’s Guide 021-0183-00 Rev A

24 of 29

Image 24
Contents LC1200R High-Bright Monitor DC Power Input Requirements Display Cosmetics LCD Panel Physical Image Characteristics IntroductionBasic Construction LCD DisplayWeight Display formatMechanical Front View Video Signal Connector DC Power Input ConnectorPhotodiode Connector Dimming Control ConnectorPower Supply LCD Controller BoardInverter Board Photodiode BoardTemperature and Humidity EnvironmentalButton Board Vibration ShockShock Packaged Product Video Signal Requirements Signal FunctionsVideo Input Lines Video ParametersSynchronization TTL Allowable Signal Levels Mode Detection TTL Sync Pulse Signal LevelsColor Display Detection Rise and Fall TimesVideo Signal On-Off Sequences Timing and FrequencyVideo, Horizontal and Vertical Sync DC Power Input Requirements DC Power Input LinesDC Input Voltage / Current Power On-Off Sequences User ControlsLCD Controller Board Controls User Adjustments Flip and MirrorMax Bright Jumper Photodiode Board and Automatic Dimming Connector Dimming Control Connector Pin Assignment and PerformanceAutomatic Brightness Mode Manual Brightness Mode Typical monitor brightness vs. ambient is as followsMaximum Brightness Mode Monitor PerformanceDIM input, volts Monitor LuminanceDisplay View Angle Display UniformityDisplay Chromaticity Color Perceived ColorDisplay Cosmetics Regulatory Agency RequirementsRFI Emission Certification System Transient Disturbance RequirementsElectrostatic Discharge Electromagnetic Energy Susceptibility RequirementsDescription of Warranty ReliabilityRohs Compliance Design WorkloadSupport and Service Glossary of Terms LC1200R User’s Guide 021-0183-00 Rev a