Oregon Scientific EB833 Time and Date, Daily Alarm, Current time and date can be set sequentially

TIME AND DATE

The current time and date can be set sequentially.

To Set the Current Date and Time:

1.Enter Normal Altitude Display or Normal Barometer Display.

2.Press and hold [TIME] for 2 seconds, the EU or US indicator starts flashing.

12.Press [TIME] again, minute digits start flashing.

13.Press [+] or [-] to increase / decrease the minute digits.

14.Pressing [TIME] a last time to exit.

NOTE The unit will return to Normal Barometer Display or Altitude Display if no buttons are pressed for 1 minutes during setting sequence.

EN

3.Press [+] or [-] to select US for US format shown as month / date or EU for European format shown as date / month.

4.Press [TIME] again, the current month flashes.

5.Press [+] or [-] to increase / decrease the month digits. For rapid acceleration of the digits, press and hold.

6.Press [TIME] again, the current date flashes.

7.Press [+] or [-] to increase / decrease the date digit.

8.Press [TIME] again, the 12-hour or 24-hour indicator starts flashing.

9.Press [+] or [-] to select between 12-hour or 24-hour time format.

10.Press [TIME] again, the hour digit starts flashing.

11.Press [+] or [-] to increase / decrease the hour digit.

13

DAILY ALARM

The EB833 has a daily alarm that can be programmed to activate at the same time each day.

To Set the Alarm Time:

1.Enter Alarm Time Display

2.Press and hold [TIME] for 2 seconds, the [ ] icon will be displayed and the [ALARM] indicator and the hour digits start flashing.

3.Press [+] or [-] to increase / decrease the hour digits.

4.Press [TIME] again, the minute digits flash.

5.Press [+] or [-] to increase / decrease the minute digit.

EB833(EN3) 13 8/31/04, 3:40 PM