ALTITUDE HISTORY DISPLAY
In addition to having altitude information displayed as a graph, altitude history can also be displayed numerically.
To numerically display previous altitude levels:
1.Enter the Altitude History Display
2.Press [+] or
ABOUT ALTITUDE CHANGE MEMORY
The EB833 can monitors the change in altitude between two points. The unit displays the net vertical difference between points of a descent / ascent. Upon clearing the altitude memory, the current altitude reading is used as a base from which the unit starts recording changes.
Point A: At this point, reset the Altitude Change Memory to 0 m./ ft. The EB833 will immediately start recording new changes in altitude.
Point B: Atthispoint,checktheAltitude ChangeMemory. The unit will display the net vertical difference between point A and point B.
CLEARING ALTITUDE MEMORY, MAX / MIN ALTITUDE MEMORY, AND VERTICAL ASCENT / DECENT MEMORY
Altituderelatedmemoriesareclearedsequentially.During the sequence, correct information can be bypassed by pressing [ALT].
NOTE To clear the maximum altitude reached memory, first enter MAX Altitude Display. Alternately, enter MIN Altitude Display to clear the minimum altitude reached memory.
To clear Altitude Mode Memories:
1.Enter Altitude Max (or Altitude Min) Display.
2.Press and hold [ALT] for about 2 seconds, the
NOTE To bypass any section without making changes to the memory, press [ALT].
3.Press [+] or
4.Press [ALT], and proceed to the maximum (or minimum) height reached memory. The subsequent maximum (or minimum) altitude digits flash.
7
EN
EB833(EN3) | 7 | 8/31/04, 3:40 PM |