Oregon Scientific EB833 user manual General Operation of the Altimeter, Normal Altitude Display

Page 4

EN

Follow these steps to install or replace batteries:

1.Open battery cover located at the back of the unit by removing screws.

2.Insert 2 (two) new CR-2032 Lithium batteries.

3. Replace the battery cover.

A battery-low indicator [ BATT ] will show on the display when the batteries require changing.

It is recommended that when the user is stationary at one elevation, that the unit is placed in Barometer Mode. The Altimeter Mode may shorten battery life. Stored altitude related data is not affected by having the unit in Barometer Mode for extended periods of time.

NOTE Disposed of improperly, batteries can be harmful. Protect the environment by taking exhausted batteries to authorized disposal stations.

GENERAL OPERATION OF THE ALTIMETER

In Altimeter Mode, by detecting changes in air pressure, the EB833 determines a given altitude level. Subsequently, the unit can be set to show changes in altitude and maximum / minimum elevations. It can store altitude-related data and display elevation trends over a 12-hour period of time. The unit can also display the net total of accumulative ascents.

A small icon indicates that the unit is in Altimeter Mode and that the displays are altitude related.

To view display sequences in Altimeter Mode:

1.Press [ALT] to move between various Altimeter Mode displays.

Normal Altitude Display

The first display in Altimeter Mode.

NOTE If the unit is being used for the first time, it will automatically enter the Normal Altimeter Display. Display shows:

CURRENT

 

ALTITUDE

ALTITUDE

 

ICON

 

 

 

ALTITUDE

CURRENT

 

TIME

 

TREND

 

 

 

GRAPH

 

 

 

CURRENT

 

 

TEMPERATURE

4

 

NORMAL ALTITUDE DISPLAY

 

 

EB833(EN3)

4

8/31/04, 3:40 PM

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Table of Contents Introduction Description of PartsInstalling and Replacing of Battery Follow these steps to install or replace batteries To view display sequences in Altimeter ModeGeneral Operation of the Altimeter Normal Altitude DisplayDisplay Display Display showsPress ALT again, Altitude History Display Display show Units of Measurement for Altitude Altitude CalibrationAbout the Altitude Change Graph To clear Altitude Mode Memories Altitude History DisplayAbout Altitude Change Memory To numerically display previous altitude levelsAltitude Sampling Rate Altitude AlarmNormal Altimeter Display Barometer and Weather Forecast Functions To ensure that accurate altitude readings are maintainedBarometric Calibrations Units of Measure for Barometric PressureAbout the Pressure Change Graph Pressure History DisplayTonumericallydisplaypreviousbarometricpressure levels To ensure that accurate barometric readings are maintainedTo View Different Time and Date Mode displays Press Time again to view the Timer Display Display showsGeneral Operation of the Time and Date Functions Normal Time DisplayDaily Alarm To Set the Alarm TimeTime and Date Current time and date can be set sequentiallyDeactivating the Alarm COUNT-UP TimerTemperature Display Resetting the UnitMaintenance Specifications Altimeter FunctionsBarometer Functions Thermometer FunctionsTime resolution Second Timer FunctionsCalendar Clock Functions Hours formatAbout Oregon Scientific Call 949-608-2848 in the USOregon Scientific. All rights reserved EB833EN3 31/04, 340 PM
Top Page Image Contents