Mitsumi electronic XD3500U user manual EN-31

Menu operation (continued)

FEATURE menu

	opt.
FEATURE
	ASPECT	NORMAL
	PASSWORD	DISPLAY INPUT
	FUNCTION
	MENU POSITION	1.
	CINEMA MODE	AUTO
?	VIDEO SIGNAL	AUTO
	SETUP	AUTO
	SCART INPUT	OFF
A Ë	LANGUAGE	English
	RESET ALL	OK

ITEM	SETTING			FUNCTION
ASPECT	NORMAL			Select to change the aspect ratio automatically depending on the input
				signal. (Select this option for normal use.)
	16:9			Select to expand squeezed (or horizontally compressed) images such as DVD
				images to 16:9. Press the ENTER button to make further settings such as
				positioning of the displayed image and selection of signals expanded by this
				function.
	FULL			Select to project images in full size (1024 x 768 pixels) irrespective of type of
			/	input signal.
PASSWORD	DISPLAY INPUT			Use to enable or cancel the password lock. See page 38 for details.
FUNCTION	MENU ACCESS	/
	SPLASH ID SCREEN
MENU POSITION	1 (upper left) / 2 (lower right)			Use to change the position of the menu.
CINEMA MODE	AUTO			The film mode will be automatically activated when a film source signal is
				input.
				Select AUTO for normal use.
				When flicker occurs on the screen, frame dropping or other incorrect display
				occurs, or jaggies on slanting lines are remarkable, select either FILM or
				VIDEO, which improves the symptom better.
	FILM			Fixed to the film mode.
	VIDEO			The film mode will not be activated.
VIDEO SIGNAL	AUTO / NTSC / PAL /			When AUTO is selected, the appropriate video format is automatically
	SECAM / 4.43NTSC / PAL-			selected depending on the input signal. If the image isn’t displayed correctly,
	M / PAL-N / PAL-60			select the desired video format manually.
SETUP	AUTO			Select to change the SETUP mode automatically.
	OFF			Select to make black lighter.
	3.75% / 7.5%			Select to make black thicker.

•When 7.5% is chosen, the brightness is decreased by the set-up cancel function for the U.S. Choose OFF when the image is dark.

SCART INPUT	ON / OFF					Choose ON when connecting the projector with a device equipped with the
						SCART terminal that can output RGB signal. SCART terminal is used mainly
						in Europe. Choose OFF normally. (Available only for the input signal from the
						COMPUTER/COMPONENT VIDEO IN-1 terminal.)
LANGUAGE			/ English / Español /			Use to select the language used in the menus.
	Deutsch / Français / Italiano
	/	/		/	/
	PORTUGUÊS / SVENSKA /
	POLSKI
RESET ALL	OK					Use to reset the settings of the menu (excluding IMAGE CAPTURE,
						PASSWORD FUNCTION and LANGUAGE) to the factory setting values.

•CINEMA MODE can be adjusted only when a TV60, TV50, 480i, 576i or 1080i signal is being displayed.

•When SCART INPUT is set to ON, nothing is output to the external monitor.

•When SCART INPUT is set to ON, normal computer signals aren’t projected.

•Use a commercially available SCART-Mini D-SUB 15-pin cable when connecting this projector with an AV device equipped with the SCART terminal.

•Some AV devices equipped with the SCART terminal aren’t compatible with this projector.

EN-31