Mitsumi electronic XD3500U Picture in Picture PinP, Magnifying the displayed image, Freeze

Page 39

Advanced features (continued)

Picture in Picture (PinP)

One of the special features of this projector is the picture-in-picture (PinP) mode. The PinP mode allows you to view the images from different sources at the same time.

•While viewing the image from the COMPUTER1, COMPUTER2, DVI, or HDMI input source, you can display the image from the VIDEO or S-VIDEO input source as a sub image.

Magnifying the displayed image

By pressing the MAGNIFY button on the remote control, you can magnify the image to view the details.

•While viewing the image from the COMPUTER1, COMPUTER2, DVI, or HDMI input source, you can magnify the image.

Sub image

To use the PinP mode

1.Press the PinP button on the remote control.

2.If necessary, select the desired external input source of the sub image by using the VIDEO or S-VIDEO button on the remote control.

3.Press the PinP button again to exit the PinP mode.

To change the position of the sub image:

Press the W or X button on the remote control.

Important:

•The PinP mode is available only when the ASPECT ratio is set to NORMAL.

•The PinP mode isn’t available with some input signals. For further information, see page 51.

•When the COMPUTER 1, COMPUTER 2, DVI-D (HDCP) or HDMI button on the remote control is pressed, the PinP mode will be canceled.

•When there is no video signal for sub image, you can’t change the display position.

•The motion may not run smoothly in the PinP mode.

Magniﬁed image

To use the MAGNIFY mode:

1.Press the MAGNIFY button on the remote control.

•You can select the area to be magniﬁed by pressing the S, T, W, or X button on the remote control.

•You can change the magniﬁcation of the selected area by pressing the + or - button.

2.Press the MAGNIFY button again to exit the MAGNIFY mode.

•The regular operation screen will appear.

Important:

•The MAGNIFY mode doesn’t function with some input signals. For details, see page 51.

•In the MAGNIFY mode, you can’t adjust the volume.

Freeze

To stop the motion in the image temporarily (or to display a still image):

Press the FREEZE button on the remote control.

• The image will freeze temporarily.

To resume the motion in the image:

Press the FREEZE button on the remote control again.

Important:

•Do not display a still picture for a long time because the afterimages may persist on the screen.

EN-39

Image 39

Contents XD3500 EN-2 Contents Important safeguards Do not keep using the damaged projector Important safeguardsChecking accessories Inserting the batteries into the remote controlPreparing your projector Terminal panel Preparing your projectorOverview Control areaRemote control Bottom sideAbout the laser beam Reception angle Using the remote controlOperational range of the remote control Using the wired remote controlFront projection Setting up your projectorSetting up the screen Screen size and projection distanceWhen projected images are distorted to a trapezoid Setting up your projectorAdjusting the position of the projected image When ﬁne streaks are seen on projected imagesRear projection Front projection, ceiling mountingViewing computer images Connecting the projector to a computerFor monitor connection Plugging the power cordViewing computer images About DDCInstalling the terminal cover Remove the lens cap Projecting imagesTo stop projecting Direct Power OFFAV mute When connecting to a notebook computerSetting of the resolution Example of the setting procedure for external outputConnecting the projector to video equipment Connecting to a video player, etcViewing video images Viewing video images Projector + DVD player or Hdtv decoderConnection for video equipment having an Hdmi terminal Connection for video equipment having a DVI-D terminal Plugging in the power cordEN-22 EN-23 Volume from the speaker Setting the aspect ratioHow to change the settings With the remote control Menu operation Menu display mode and menu typeMenus displayed in the Quick Menu mode Menus displayed in the Detail Menu modeMenu operation Basic procedure for setting the menusQuick Menu Settings of each menu itemEN-28 Advanced Menu Image menuEN-30 EN-31 User Signal menuTo adjust the tone of white Color Temp Adjusting projected imagesTo adjust the brightness Contrast and Brightness To adjust the color Color and TintAdjusting projected images About color temperatureColor Enhancer YES How to adjust the computer imageLPF Progressive ﬁlter Simple method to adjust the image positionTo adjust the horizontal position To adjust the vertical positionSetting procedure Advanced featuresTo enable the password function Advanced featuresPassword function To cancel the password functionPicture in Picture PinP Magnifying the displayed imageFreeze UP button Mouse remote controlProjector + computer with USB connector OperationSupervising and controlling by computer Major functionsConnection Indicators Normal conditionAbnormal condition Replacing the lamp Interval of lamp replacementReset of the lamp operation time Replacing the lampTo replace the lamp When removing the lamp from the ceiling-mounted projector MaintenanceCleaning of the projector and the ventilation slots Cleaning of the lensNo image appears on the screen Problem Solution TroubleshootingImages are not displayed correctly Problem Solution TroubleshootingOthers Problem Solution EN-49 Speciﬁcations Replacement part option/not included in the boxXGA85 SpeciﬁcationsConnectors Dimension drawings unit mmWithout terminal cover Mitsubishi Electric Corporation