Mitsumi electronic HC6500 user manual Viewing video images, Connecting to a video player, etc

Page 15

Viewing video images (continued)

Connecting to a video player, etc.

Video player, or the like

Video cable (option)

1 To VIDEO	2 To video output
1 To VIDEO	terminal
IN terminal

S-video cable (option)	Video player, or the like
S-video cable (option)
2	To S-video
1 To S-VIDEO	output terminal
IN terminal

1.Connect one end of the optional video cable to the VIDEO IN terminal of the projector.

2.Connect the other end of the video cable to the video output terminal of the video equipment.

When the video equipment is equipped with the S-video output terminal, make the connection as follows:

1.Connect one end of the optional S-video cable to the S-VIDEO IN terminal of the projector.

2.Connect the other end of the S-video cable to the S- video output terminal of the video equipment.

•Also read the instruction manual of the equipment to be connected.

•Contact your dealer for details of connection.

When a TV tuner or VCR is connected:

When you use this projector with a TV tuner or VCR connected, no image may appear or a message of NO SIGNAL may appear on the screen when you change the channel via any channel that is not being received. In such a case, set the channels of the TV tuner or VCR again. To avoid such symptom, use the TV tuner or VCR with its channel skip function (that is a function not to display channels that are not being received) enabled.

Connecting to a DVD player or HDTV decoder

To connect this projector to video equipment that has component video output terminals, such as a DVD player, use the COMPONENT VIDEO IN terminals.

Y

Component cable (option)

Y

PR/CR

PB/CB

PR/CR PB/CB Y

DVD player or HDTV decoder

•The terminal’s names Y, PB, and PR are given as examples of when a HDTV decoder is connected.

•The terminal’s names vary depending on the connected devices.

•Images may not be projected correctly depending on the type of the DVD player you use.

•Though it may take some time before an image is displayed on the screen depending on the type of the input signal, such symptom is not a malfunction.

•When connecting a HDTV decoder having RGB output terminals, set COMPUTER INPUT to RGB in the SIGNAL menu.

EN-15

Image 15

Contents HC6500 Risk of Electric Shock Do not Open When using the projector in EuropeContents Important safeguards Important safeguards Preparing your projector Checking accessoriesInserting the batteries into the remote control Removing the batteries from the remote controlAttaching the lens cap Indicator area Control panel Terminal panelPreparing your projector OverviewBottom side Remote controlUsing the picture quality adjusting buttons Adjustment feetUsing the remote control Operational range of the remote controlReception angle Screen size and projection distance Setting up your projectorSetting up the screen When the aspect ratio of the screen isSetting up your projector When the aspect ratio of the screen is 2.351 CinemaScopeWhen the aspect ratio of the image is Correcting skewed or distorted image Adjusting the position of the projected image When ﬁne streaks are seen on projected images When projected images are distorted to a trapezoidFront projection, ceiling mounting Rear projectionTrigger terminal Preparation Connecting the projector to video equipmentViewing video images Basic home theater system connectionViewing video images Connecting to a video player, etcConnecting to a DVD player or Hdtv decoder When a TV tuner or VCR is connectedConnection for video equipment having an Hdmi terminal Connecting to video equipment having a Hdmi terminalPlugging in the power cord Projecting images To stop projecting ZOOM1 ZOOM2 Stretch ANAMORPHIC1 ANAMORPHIC2 Setting the aspect ratioHow to change the settings With the remote controlWith the Feature menu See page 26 for menu setting About DDC Connecting the projector to a computerPlugging the power cord Viewing computer imagesComputer Viewing computer imagesAuto Position button When connecting to a notebook computerSetting of the resolution Example of the setting procedure for external outputMenu operation Image menu How to set the menusAvailable settings in the menus Menu operationInstallation menu Feature menu User menu Signal menuInformation menu To store the settingsTo enable the stored image quality settings AV memoryTo sharpen or soften the projected image Sharpness Adjusting projected imagesTo adjust the brightness Contrast and Brightness To adjust the color Color and TintTo enable the stored color temperature Adjusting projected imagesTo adjust the tone of white Color Temp About color temperatureNoise reduction To adjust the ratio of change in brightness Gamma ModeLPF Progressive ﬁlter To adjust the vertical positionTo cancel the password function Advanced featuresPassword function To enable the password functionReplacing the lamp Interval of lamp replacementReset of the lamp operation time Replacing the lampTo replace the lamp When removing the lamp from the ceiling-mounted projector Cleaning of the lens MaintenanceCleaning of the air-ﬁlter Cleaning of the projector and the ventilation slotsNo image appears on the screen Problem Solution TroubleshootingImages are not displayed correctly Problem Solution TroubleshootingOthers Problem Solution Abnormal condition IndicatorsCondition Possible Solution Normal conditionSpeciﬁcations Dimension drawings unit mmSpeciﬁcations VLT-HC7000LP ConnectorsReplacement part option/not included in the box Computer IN/COMPONENT Video HdmiMitsubishi Electric Corporation