Mitsumi electronic HC6500 user manual AV memory, Information menu, To store the settings

Page 30

Menu operation (continued)

6. INFORMATION menu

 

opt.

 

INFORMATION

 

 

LAMP TIME(LOW)

0 H

 

 

 

INPUT

COMPUTER

 

RESOLUTION

1024X768

 

VERTICAL

75.04 Hz

 

FREQUENCY

 

 

 

HORIZONTAL

60.02 KHz

 

FREQUENCY

 

 

R G

B

 

H V

SYNC. TYPE

5wire

6. INFORMATION menu

 

ITEM

DESCRIPTION

LAMP TIME(LOW)

This item shows a lamp operating time (hour) calculated based on that LAMP MODE

 

is LOW.

•When the LAMP MODE is STANDARD, this item shows a longer lamp operating time than the actual time. (See page 36 for the interval of lamp replacement. )

•When the lamp operating time is 0 to 10 hours, “0H” is displayed. The lamp operating time exceeding 10 hours is indicated by the actual hours.

•When the lamp operating time reaches 3750 hours, the bar turns to yellow. When

 

it reaches 4750 hours, the bar turns to red.

INPUT

Indicates the name of the terminal to which the currently projected video signal is

 

being input.

RESOLUTION

Indicates the resolution of the currently projected video signal.

VERTICAL FREQUENCY

Indicates the vertical frequency of the currently projected video signal.

HORIZONTAL FREQUENCY

Indicates the horizontal frequency of the currently projected video signal.

SYNC. TYPE

Indicates the type of the sync signal for the currently projected video signal.

AV memory

You can store up to 3 patterns of the image quality setting for each input source.

To store the settings

1.Set the items of the IMAGE menu.

• Setting the items by using the picture quality adjusting buttons on the remote control is also available.

2.Press the S or T button to select AV MEMORY SAVE.

3.Press the W or X button to select AV MEMORY (1, 2 or 3) to store the settings.

4.Press the ENTER button.

To enable the stored image quality settings

1. Press the AV MEMORY button to call up the stored setting.

•When you make change to the stored setting you call up, the changed setting remains effective but is not saved to the AV MEMORY unless AV MEMORY SAVE is executed.

•When the input source is changed, the AV memory setting selected just before is automatically selected.

•When RESET ALL in the FEATURE menu is selected, all the settings of the AV memory are cleared.

EN-30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents HC6500 When using the projector in Europe Risk of Electric Shock Do not OpenContents Important safeguards Important safeguards Removing the batteries from the remote control Checking accessoriesInserting the batteries into the remote control Preparing your projectorOverview Indicator area Control panel Terminal panelPreparing your projector Attaching the lens capAdjustment feet Remote controlUsing the picture quality adjusting buttons Bottom sideUsing the remote control Operational range of the remote controlReception angle When the aspect ratio of the screen is Setting up your projectorSetting up the screen Screen size and projection distanceSetting up your projector When the aspect ratio of the screen is 2.351 CinemaScopeWhen the aspect ratio of the image is When projected images are distorted to a trapezoid Adjusting the position of the projected imageWhen fine streaks are seen on projected images Correcting skewed or distorted imageFront projection, ceiling mounting Rear projectionTrigger terminal Basic home theater system connection Connecting the projector to video equipmentViewing video images PreparationWhen a TV tuner or VCR is connected Connecting to a video player, etcConnecting to a DVD player or Hdtv decoder Viewing video imagesConnecting to video equipment having a Hdmi terminal Connection for video equipment having an Hdmi terminalPlugging in the power cord Projecting images To stop projecting Setting the aspect ratio ZOOM1 ZOOM2 Stretch ANAMORPHIC1 ANAMORPHIC2How to change the settings With the remote controlWith the Feature menu See page 26 for menu setting Viewing computer images Connecting the projector to a computerPlugging the power cord About DDCViewing computer images ComputerExample of the setting procedure for external output When connecting to a notebook computerSetting of the resolution Auto Position buttonMenu operation Menu operation How to set the menusAvailable settings in the menus Image menuInstallation menu Feature menu Signal menu User menuAV memory To store the settingsTo enable the stored image quality settings Information menuTo adjust the color Color and Tint Adjusting projected imagesTo adjust the brightness Contrast and Brightness To sharpen or soften the projected image SharpnessAbout color temperature Adjusting projected imagesTo adjust the tone of white Color Temp To enable the stored color temperatureTo adjust the ratio of change in brightness Gamma Mode Noise reductionTo adjust the vertical position LPF Progressive filterTo enable the password function Advanced featuresPassword function To cancel the password functionInterval of lamp replacement Replacing the lampReset of the lamp operation time Replacing the lampTo replace the lamp When removing the lamp from the ceiling-mounted projector Cleaning of the projector and the ventilation slots MaintenanceCleaning of the air-filter Cleaning of the lensTroubleshooting No image appears on the screen Problem SolutionTroubleshooting Images are not displayed correctly Problem SolutionOthers Problem Solution Normal condition IndicatorsCondition Possible Solution Abnormal conditionDimension drawings unit mm SpecificationsSpecifications Computer IN/COMPONENT Video Hdmi ConnectorsReplacement part option/not included in the box VLT-HC7000LPMitsubishi Electric Corporation

HC6500 specifications

The Mitsumi HC6500 is an innovative electronic component that has garnered attention for its versatile features and advanced technologies. This device is primarily known for its role as a high-performance connectivity solution in various electronic applications. The HC6500 stands out in the crowded market of electronic components by incorporating several key characteristics that enhance its overall functionality and usability.

One of the main features of the HC6500 is its wide compatibility with various communication protocols. This allows it to easily integrate into different systems, whether they are automotive, industrial automation, or consumer electronics. The device supports both wired and wireless communication, making it a flexible option for designers looking to streamline their connectivity solutions.

The HC6500 also boasts a compact design, which reduces space requirements in circuit designs. Its form factor is particularly beneficial for applications where space is at a premium, such as in portable devices and IoT gadgets. This small footprint does not compromise performance, as the HC6500 delivers robust connectivity with high data transfer rates that cater to the demands of modern applications.

In terms of power efficiency, the HC6500 is engineered to operate with low power consumption, which is essential for battery-operated devices. This energy efficiency is complemented by its advanced thermal management features, ensuring stable performance even under heavy loads or extended use.

The device also incorporates sophisticated error correction technologies, which enhance data integrity during transmission. This is particularly vital in critical applications, such as medical devices and automotive systems, where data accuracy is non-negotiable. The HC6500’s ability to maintain a reliable connection under various environmental conditions is another hallmark of its design.

Furthermore, the HC6500 is built with an emphasis on durability. Its materials and construction are designed to withstand extreme temperatures, vibrations, and other challenging conditions often encountered in industrial and outdoor environments. This reliability ensures that the HC6500 can perform consistently over a long lifespan, reducing maintenance and replacement costs.

Overall, the Mitsumi HC6500 is a well-rounded electronic component that combines cutting-edge technology with practical features, making it an excellent choice for designers and engineers looking to enhance their products with reliable connectivity solutions.
Top Page Image Contents