Mitsumi electronic HC6500 user manual Maintenance, Cleaning of the air-filter, Cleaning of the lens

Page 39
Right side panel
Fixing screws

Maintenance

Warning:

•Never use flammable air duster or other materials when cleaning the air-filter. Flammable substances may ignite causing fire or breakdown when the lamp is illuminated.

•Do not use flammable solvents (benzene, thinner, etc.) and flammable aerosols when cleaning the projector body and lens. Flammable substances may ignite causing fire or breakdown while the lamp is illuminating.

Caution:

Be sure to turn off the lamp and unplug the power cord from the wall outlet before you perform any maintenance on the projector.

Cleaning of the air-filter

Clean the air-filter frequently (about once a month). If the air-filter or ventilation grilles become clogged with dirt or dust, the temperature inside the projector may rise and cause troubles, such as damage to the inside parts and shortening the life of the panels.

• When the temperature inside the projector rises, the STATUS indicator will blink orange and the lamp will be turned off.

1. Loosen two screws that are fixing the right side panel using a Phillips screwdriver (+) and remove the panel from the projector.

2.Remove the filter from the right side panel.

(1)Remove the holder by pushing the tab of the holder on the air- filter in the direction of the arrow.

(2)Remove the air-filter (white), spacer, and air-filter (gray).

3. Clean dirt and dust adhering to the air-filter using a vacuum.

 

• For the air-filter (white)

 

If stubborn stains persist, wash the air-filter with water

Holder

and dry well in the shade.

 

•For the air-filter (gray)

If stubborn stains persist, wash the air-filter with diluted detergent, rinse with water, and dry well.

Back of the right side panel

4.Attach the filter to the right side panel.

(1)Attach the air-filter (gray), spacer, and air-filter (white) to the side panel, aligning their notches with that of the side panel.

(2)Insert the right tab of the holder to the side panel and push the left tab in the direction of the arrow to attach the side panel.

Air-filter (gray)

Spacer

Air-filter (white)

5.Attach the right side panel to the projector and fix it with two screws.

Important:

•If the air-filter is damaged or becomes extremely dirty, change it with a new air-filter. Contact your dealer for a new air-filter.

•Use the dedicated air-filter only.

Holder

Fixing screws

Caution:

Be sure to use the projector with an air-filter. If not, dust may get inside the projector causing fire and failure.

Cleaning of the projector and the ventilation slots

Use a soft cloth to clean the projector and the ventilation grilles. When the grilles become dirty, wipe them with a soft cloth dampened with diluted mild detergent, and then wipe them with a dry cloth.

To protect the surface of the projector from fading or deteriorating:

•Do not spray insecticide on or inside the projector.

•Do not use benzine or thinner to clean it.

•Do not let rubber or plastic materials contact with projector.

Cleaning of the lens

Use a standard lens-cleaning brush or a piece of lens tissue dampened with lens cleaning fluid. The lens surface is fragile. Use only recommended, nonabrasive lens-cleaning materials. Do not touch the lens with your fingers.

EN-39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents HC6500 Risk of Electric Shock Do not Open When using the projector in EuropeContents Important safeguards Important safeguards Preparing your projector Checking accessoriesInserting the batteries into the remote control Removing the batteries from the remote controlAttaching the lens cap Indicator area Control panel Terminal panelPreparing your projector OverviewBottom side Remote controlUsing the picture quality adjusting buttons Adjustment feetUsing the remote control Operational range of the remote controlReception angle Screen size and projection distance Setting up your projectorSetting up the screen When the aspect ratio of the screen isSetting up your projector When the aspect ratio of the screen is 2.351 CinemaScopeWhen the aspect ratio of the image is Correcting skewed or distorted image Adjusting the position of the projected imageWhen fine streaks are seen on projected images When projected images are distorted to a trapezoidFront projection, ceiling mounting Rear projectionTrigger terminal Preparation Connecting the projector to video equipmentViewing video images Basic home theater system connectionViewing video images Connecting to a video player, etcConnecting to a DVD player or Hdtv decoder When a TV tuner or VCR is connectedConnection for video equipment having an Hdmi terminal Connecting to video equipment having a Hdmi terminalPlugging in the power cord Projecting images To stop projecting ZOOM1 ZOOM2 Stretch ANAMORPHIC1 ANAMORPHIC2 Setting the aspect ratioHow to change the settings With the remote controlWith the Feature menu See page 26 for menu setting About DDC Connecting the projector to a computerPlugging the power cord Viewing computer imagesComputer Viewing computer imagesAuto Position button When connecting to a notebook computerSetting of the resolution Example of the setting procedure for external outputMenu operation Image menu How to set the menusAvailable settings in the menus Menu operationInstallation menu Feature menu User menu Signal menuInformation menu To store the settingsTo enable the stored image quality settings AV memoryTo sharpen or soften the projected image Sharpness Adjusting projected imagesTo adjust the brightness Contrast and Brightness To adjust the color Color and TintTo enable the stored color temperature Adjusting projected imagesTo adjust the tone of white Color Temp About color temperatureNoise reduction To adjust the ratio of change in brightness Gamma ModeLPF Progressive filter To adjust the vertical positionTo cancel the password function Advanced featuresPassword function To enable the password functionReplacing the lamp Interval of lamp replacementReset of the lamp operation time Replacing the lampTo replace the lamp When removing the lamp from the ceiling-mounted projector Cleaning of the lens MaintenanceCleaning of the air-filter Cleaning of the projector and the ventilation slotsNo image appears on the screen Problem Solution TroubleshootingImages are not displayed correctly Problem Solution TroubleshootingOthers Problem Solution Abnormal condition IndicatorsCondition Possible Solution Normal conditionSpecifications Dimension drawings unit mmSpecifications VLT-HC7000LP ConnectorsReplacement part option/not included in the box Computer IN/COMPONENT Video HdmiMitsubishi Electric Corporation

HC6500 specifications

The Mitsumi HC6500 is an innovative electronic component that has garnered attention for its versatile features and advanced technologies. This device is primarily known for its role as a high-performance connectivity solution in various electronic applications. The HC6500 stands out in the crowded market of electronic components by incorporating several key characteristics that enhance its overall functionality and usability.

One of the main features of the HC6500 is its wide compatibility with various communication protocols. This allows it to easily integrate into different systems, whether they are automotive, industrial automation, or consumer electronics. The device supports both wired and wireless communication, making it a flexible option for designers looking to streamline their connectivity solutions.

The HC6500 also boasts a compact design, which reduces space requirements in circuit designs. Its form factor is particularly beneficial for applications where space is at a premium, such as in portable devices and IoT gadgets. This small footprint does not compromise performance, as the HC6500 delivers robust connectivity with high data transfer rates that cater to the demands of modern applications.

In terms of power efficiency, the HC6500 is engineered to operate with low power consumption, which is essential for battery-operated devices. This energy efficiency is complemented by its advanced thermal management features, ensuring stable performance even under heavy loads or extended use.

The device also incorporates sophisticated error correction technologies, which enhance data integrity during transmission. This is particularly vital in critical applications, such as medical devices and automotive systems, where data accuracy is non-negotiable. The HC6500’s ability to maintain a reliable connection under various environmental conditions is another hallmark of its design.

Furthermore, the HC6500 is built with an emphasis on durability. Its materials and construction are designed to withstand extreme temperatures, vibrations, and other challenging conditions often encountered in industrial and outdoor environments. This reliability ensures that the HC6500 can perform consistently over a long lifespan, reducing maintenance and replacement costs.

Overall, the Mitsumi HC6500 is a well-rounded electronic component that combines cutting-edge technology with practical features, making it an excellent choice for designers and engineers looking to enhance their products with reliable connectivity solutions.
Top Page Image Contents