Onkyo TX-SR500E appendix Connecting to audio/video equipment, About Digital Input Optical jack

Page 10

Connecting to audio/video equipment

Here is explanation of how to connect the main components to the TX-SR500/SR500E in the standard manner. There are many ways that any one component can be connected, and it is up to you to decide which method best fits your situation. The directions given here are only one option and should only be thought of as such. It is best to fully understand the nature of each connector and terminal as well as each of your components and their features to ascertain which method of connection is best.

Be sure to always refer to the instruction manual that came with the component that you are connecting.

Do not plug in the power cord until all connections have been made.

For input jacks, red connectors (marked R) are used for the right channel, white connectors (marked L) are used for the left channel, and yellow connectors (marked VIDEO) are used for video connection.

Insert all plugs and connectors securely. Improper connections can result in noise, poor performance, or damage to the equipment.

Improper connection

Inserted completely

Do not bind audio connection cables with power cords and speaker cables. Doing so may adversely effect the sound quality.

VIDEO

Video connection cable (Analog signal)

Note

TV monitor or Projector

The signal that comes in

(MONITOR OUT)

from S VIDEO IN is sent

 

to S VIDEO OUT. The

VIDEO S VIDEO

 

S video plug

Audio (L)

S video connection cable (S video signal)

Audio connection cable

signal that comes in from

IN IN

VIDEO IN is sent to

 

VIDEO OUT.

 

ANTENNA

 

 

 

FM

AM

75

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Audio (R)

(Analog signal)

 

 

 

 

 

Optical plug

Optical fiber cable

 

 

 

 

(Digital signal)

 

 

 

Signal flow

 

FRONT

FRONT

SURROUND

AC OUTLET

SPEAKERS A

SPEAKERS B

SPEAKERS

 

DIGITAL INPUT

OPTICAL

COAXIAL

REMOTE

2

1

 

CONTROL

IN

OUT

IN

 

L

SUBWOOFER

PRE OUT

R

CD TAPE

L

VIDEO 2

 

VIDEO 1

 

DVD

MONITOR

 

 

 

 

 

 

 

 

OUT

 

 

 

 

 

 

 

 

IN

OUT

IN

 

IN

VIDEO

R

S VIDEO

IN

OUT

IN

FRONT SURR CENTER

 

 

 

L

 

 

 

R

VIDEO 2

VIDEO 1

SUB

WOOFER

DVD

 

L

DO NOT connect the

 

CENTER

L

SPEAKER

power cord (mailns

 

R

R

lead) at this time.

 

About DIGITAL INPUT (OPTICAL) jack

Remove the protective caps before making connections. When not in use, be sure to replace them.

 

R

L

DIGITAL

AUDIO OUT

OUT

(PLAY)

OPTICAL

 

 

CD player (CD)

R

L

R

L

 

AUDIO IN

AUDIO OUT DIGITAL

(REC)

 

(PLAY)

OUT

 

 

 

 

OPTICAL

Cassette Tape deck, MD recorder, DAT deck, CD recorder (TAPE)

To connect the digital output from a component connected to the TAPE jacks to this unit, use the OPTICAL 1 input jack.

To connect the digital output to the OPTICAL 2 or COAXIAL input jack of this unit, it is required to change the assignment of digital inputs to input sources by referring to “Setting the digital inputs” on page 22.

The TAPE OUT jack does not output the signal input from the

10 DIGITAL INPUT jack. (The digital signal is not converted into analog signal.)

To connect the digital output from CD player connected to the CD jacks to this unit, use the OPTICAL 2 input jack.

To connect the digital output to the OPTICAL 1 or COAXIAL input jack of this unit, it is required to change the assignment of digital inputs to input sources by referring to “Setting the digital inputs” on page 22.

Image 10
Contents TX-SR500 TX-SR500E Important safeguards AvisPrecautions Precautions FeaturesSupplied accessories Amplifier FeaturesSetting the AM tuning step frequency Worldwide models only Before using the unitSetting the voltage selector Worldwide models only Using the remote controllerIndex to parts and controls Index to parts and controls Antenna 14 ZREMOTE ControlRear panel Tape IN/OUT@ Adjust 2/3 button Preset 2/3 button= Mode buttons # Volume 5/∞ button 21Connecting to audio/video equipment About Digital Input Optical jackOretc Connecting to audio/video equipmentAbout the DVD, Video 1, Video 2 and Monitor OUT jacks Do NOTCENTERconnectStandard speaker placement of the Speakers a system Positioning speakers/Connecting speakersUsing the provided speaker labels Connecting to Speakers a Positioning speakers/Connecting speakersHow to connect to the Front Speakers B terminals Connecting to Speakers BAdjusting the position of the FM indoor antenna aerial Connecting antennasConnecting the supplied FM and AM indoor antennas aerials Adjusting the position of the AM indoor antenna aerialConnecting an AM outdoor antenna aerial Connecting antennasConnecting an FM outdoor antenna aerial Directional IinkagePower off function Connections for remote control zPower on/ready function Direct change functionConnecting the power/Turning on the AV Receiver Press STANDBY/ONSetting the crossover frequency Speaker setupPress Speaker Adjust twice Speaker setup Subwoofer Mode Setting the subwoofer mode Press Subwoofer Mode on the unit→ Subwoofer Mode Adjusting each speaker’s relative volume balance Test tonePlaying the connected source About digital soundPlaying the connected source To restore the display Using multi channel inputSwitch the source from Tape to MD Direct CH SEL Level 5/∞Press Memory while holding down Tuning manuallyListening to the radio Press TunerPress Tuner to switch the input source to the tuner Presetting radio stationsSelecting preset stations Listening to the radioVarious functions common to all the sources Muting the sound remote controller only Press MutingListening through headphones Turning on/off the Speakers A/SPEAKERS B systemsVarious functions common to all the sources Using the sleep timer remote controller only Press SleepChanging the display Press Display To fix the digital signal to DTS or PCM Setting the input signal formatLevel 5/∞ Treble adjustment Using the Audio Adjust functionBass adjustment Late night functionEnjoying the listening modes Input sources and available listening mode Enjoying the listening modesWhen the sound is Pro Logic II Movie, Dolby Digital or DTS Selecting the listening modeWhen the sound is Dolby Digital Various functions while playing surround soundVideo camera Recording a sourceStart recording at the recording component as desired CD playerDVD operation buttons Using remote controllerControlling an Onkyo DVD player OSD operation buttonsControlling an Onkyo cassette tape deck Using remote controllerControlling an Onkyo CD player Press RCVR/TAPE Press the desired operation buttonNumeric buttons TV DVDWhen entering the code of Onkyo DVD players Controlling a DVD playerTroubleshooting Amplifier Remote controller Symptoms Causes Remedies PagesSymptoms Causes Remedies TroubleshootingWhen incorrect operation is observed OtherSpecifications Onkyo Europe Electronics GmbH

TX-SR500E specifications

The Onkyo TX-SR500E is a remarkable AV receiver designed for home theater enthusiasts who appreciate high-quality audio and video performance. This receiver is a testament to Onkyo's commitment to delivering immersive sound experiences and is suitable for both music and movie lovers.

One of the standout features of the TX-SR500E is its support for multiple audio formats, including Dolby TrueHD and DTS-HD Master Audio, which ensure that users can experience lossless audio quality for their favorite films and music. The receiver is equipped with a powerful amplifier section that delivers 80 watts per channel, ensuring room-filling sound that can handle a variety of audio demands, whether you are watching the latest blockbuster or listening to your favorite albums.

Additionally, the TX-SR500E features advanced video processing capabilities. It includes HDMI connectivity with support for 4K video passthrough, allowing users to enjoy high-definition video content without compromising quality. With four HDMI inputs, connecting multiple devices—such as Blu-ray players, gaming consoles, and streaming devices—is simple and efficient.

The Onkyo TX-SR500E also incorporates Onkyo’s proprietary Audyssey technology, which provides automatic speaker calibration for optimal sound settings based on your specific listening environment. This technology analyzes the room acoustics and makes adjustments to ensure a balanced and immersive sound stage, making it user-friendly for those who may not be audio experts.

In terms of connectivity, the receiver includes built-in Bluetooth support, enabling users to stream music directly from their smartphones or tablets. This feature adds a layer of convenience, allowing for versatile listening options alongside traditional inputs like USB and analog connections.

The design of the TX-SR500E is sleek and modern, featuring an intuitive front panel layout with easy-to-use controls and a clear display. This not only enhances aesthetics but also user experience, making it accessible for anyone looking to enhance their audio-visual setup.

In summary, the Onkyo TX-SR500E is a feature-rich AV receiver that excels across the board in sound quality, connectivity, and user-friendliness. Ideal for both casual listeners and dedicated audiophiles, it stands out in the competitive landscape of home theater receivers.