Onkyo TX-SR500E appendix Playing the connected source, About digital sound

Page 21

Playing the connected source

MASTER VOLUME dial

SP A

SP B

Input Selector

SPEAKERS A/B

Input Selector buttons

buttons

VOLUME 5/∞

This section shows you how to play the sources connected to the AV Receiver.

You may need to see “Connecting to audio/video equipment” on page 10 while following the steps in this section.

Selecting a sound source

1.Press input selector button to select one of the following input sources:

•DVD

•VIDEO 1

•VIDEO 2

•VIDEO 3

•TAPE

•CD

e.g. When VIDEO 3 is selected.

Volume level

About digital sound

If the equipment is digitally connected to the AV Receiver, the sound from the digital input will automatically be selected and reproduced instead of the analog sound as explained below.

The initial settings are as follows:

•When the DVD source is selected, the digital sound from the DIGITAL INPUT COAXIAL connector is reproduced.

•When the CD source is selected, the digital sound from the DIGITAL INPUT OPTICAL 2 connector is reproduced.

•When the TAPE source is selected, the digital sound from the DIGITAL INPUT OPTICAL 1 connector is reproduced.

When the digital sound is reproduced, the ŸDIGITAL, DTS, or PCM (2 channel digital stereo) indicator lights up according to the received sound system in the AV Receiver’s display.

ŸDIGITAL PCM

DTS

When MD recorder is connected to the TAPE jacks, you can switch the source from TAPE to MD (see page 23).

2.Ensure that the indicator(s) for the speaker system(s) to be used are lit on the display.

If no SPEAKERS indicator is lit, press SPEAKERS A/B on the unit or SP A/SP B on the remote controller to select the speaker system(s) to be used.

Various functions while playing the connected source

To use the following functions, see pages 26 and 27.

•Turning on/off the SPEAKERS A/SPEAKERS B systems

•Muting the sound

•Listening through headphones

•Changing the display

•Controlling the brightness of the lghts on the AV Receiver

•Using the sleep timer

3.Start playing the selected source.

4.Press VOLUME 5/∞ on the remote controller or turn MASTER VOLUME dial on the unit to adjust the volume.

Enjoying the surround modes while playing the connected source

See page 30.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents TX-SR500 TX-SR500E Avis Important safeguardsPrecautions Supplied accessories FeaturesPrecautions Amplifier FeaturesSetting the voltage selector Worldwide models only Before using the unitSetting the AM tuning step frequency Worldwide models only Using the remote controllerIndex to parts and controls Index to parts and controls Rear panel ZREMOTE ControlAntenna 14 Tape IN/OUT= Mode buttons Preset 2/3 button@ Adjust 2/3 button # Volume 5/∞ button 21About Digital Input Optical jack Connecting to audio/video equipmentAbout the DVD, Video 1, Video 2 and Monitor OUT jacks Connecting to audio/video equipmentOretc Do NOTCENTERconnectPositioning speakers/Connecting speakers Standard speaker placement of the Speakers a systemUsing the provided speaker labels How to connect to the Front Speakers B terminals Positioning speakers/Connecting speakersConnecting to Speakers a Connecting to Speakers BConnecting the supplied FM and AM indoor antennas aerials Connecting antennasAdjusting the position of the FM indoor antenna aerial Adjusting the position of the AM indoor antenna aerialConnecting an FM outdoor antenna aerial Connecting antennasConnecting an AM outdoor antenna aerial Directional IinkagePower on/ready function Connections for remote control zPower off function Direct change functionPress STANDBY/ON Connecting the power/Turning on the AV ReceiverSpeaker setup Setting the crossover frequencyPress Speaker Adjust twice Speaker setup → Subwoofer Mode Setting the subwoofer mode Press Subwoofer Mode on the unitSubwoofer Mode Adjusting each speaker’s relative volume balance Test toneAbout digital sound Playing the connected sourcePlaying the connected source Switch the source from Tape to MD Using multi channel inputTo restore the display Direct CH SEL Level 5/∞Listening to the radio Tuning manuallyPress Memory while holding down Press TunerSelecting preset stations Presetting radio stationsPress Tuner to switch the input source to the tuner Listening to the radioListening through headphones Muting the sound remote controller only Press MutingVarious functions common to all the sources Turning on/off the Speakers A/SPEAKERS B systemsUsing the sleep timer remote controller only Press Sleep Various functions common to all the sourcesChanging the display Press Display Setting the input signal format To fix the digital signal to DTS or PCMLevel 5/∞ Bass adjustment Using the Audio Adjust functionTreble adjustment Late night functionEnjoying the listening modes Enjoying the listening modes Input sources and available listening modeWhen the sound is Dolby Digital Selecting the listening modeWhen the sound is Pro Logic II Movie, Dolby Digital or DTS Various functions while playing surround soundStart recording at the recording component as desired Recording a sourceVideo camera CD playerControlling an Onkyo DVD player Using remote controllerDVD operation buttons OSD operation buttonsControlling an Onkyo CD player Using remote controllerControlling an Onkyo cassette tape deck Press RCVR/TAPE Press the desired operation buttonTV DVD Numeric buttonsControlling a DVD player When entering the code of Onkyo DVD playersAmplifier Remote controller Symptoms Causes Remedies Pages TroubleshootingWhen incorrect operation is observed TroubleshootingSymptoms Causes Remedies OtherOnkyo Europe Electronics GmbH Specifications

TX-SR500E specifications

The Onkyo TX-SR500E is a remarkable AV receiver designed for home theater enthusiasts who appreciate high-quality audio and video performance. This receiver is a testament to Onkyo's commitment to delivering immersive sound experiences and is suitable for both music and movie lovers.

One of the standout features of the TX-SR500E is its support for multiple audio formats, including Dolby TrueHD and DTS-HD Master Audio, which ensure that users can experience lossless audio quality for their favorite films and music. The receiver is equipped with a powerful amplifier section that delivers 80 watts per channel, ensuring room-filling sound that can handle a variety of audio demands, whether you are watching the latest blockbuster or listening to your favorite albums.

Additionally, the TX-SR500E features advanced video processing capabilities. It includes HDMI connectivity with support for 4K video passthrough, allowing users to enjoy high-definition video content without compromising quality. With four HDMI inputs, connecting multiple devices—such as Blu-ray players, gaming consoles, and streaming devices—is simple and efficient.

The Onkyo TX-SR500E also incorporates Onkyo’s proprietary Audyssey technology, which provides automatic speaker calibration for optimal sound settings based on your specific listening environment. This technology analyzes the room acoustics and makes adjustments to ensure a balanced and immersive sound stage, making it user-friendly for those who may not be audio experts.

In terms of connectivity, the receiver includes built-in Bluetooth support, enabling users to stream music directly from their smartphones or tablets. This feature adds a layer of convenience, allowing for versatile listening options alongside traditional inputs like USB and analog connections.

The design of the TX-SR500E is sleek and modern, featuring an intuitive front panel layout with easy-to-use controls and a clear display. This not only enhances aesthetics but also user experience, making it accessible for anyone looking to enhance their audio-visual setup.

In summary, the Onkyo TX-SR500E is a feature-rich AV receiver that excels across the board in sound quality, connectivity, and user-friendliness. Ideal for both casual listeners and dedicated audiophiles, it stands out in the competitive landscape of home theater receivers.
Top Page Image Contents