Onkyo TX-SR500E appendix Index to parts and controls

Index to parts and controls

Display

			e g
a b	c	d		f	h

i

!SPEAKERS A/B buttons [21, 26]

Press SPEAKERS A/B to turn on/off the speaker system A/B. The (SPEAKERS) A/B indicators corresponding to the selected speaker system light up. You can use SPEAKERS A and B simultaneously.

@PHONES jack [26]

This is a standard stereo jack for connecting stereo headphones. The audio for the front right and left speakers are sent to the headphone speakers.

#DISPLAY button [27]

Each time you press the DISPLAY button, the display changes.

$AUDIO SELECTOR button [28]

Press to select an audio input signal format other than FM and AM. Each time this button is pressed, the setting cycles.

j

a(SPEAKERS) A/B indicators [21, 26]

Shows the current speaker system in use.

bMUTING indicator [26]

Flashes when the mute function is active.

cSource/Listening mode indicators [21, 32]

One of these indicators lights to show the format of the current source as “PCM”, “ŸDIGITAL” or “DTS”. In addition, one of the listening mode indicators “Ÿ PRO LOGIC II”, “MULTI CH”, “DSP”, “STEREO” and “DIRECT” lights according to the current listening mode.

dTUNED indicator [24]

Lights up when a radio station is received.

%Input selector buttons (DVD, VIDEO 1, VIDEO 2, VIDEO 3, TAPE, TUNER, and CD) [21-25, 28, 33]

These buttons are used to select the input source. Pressing and holding the TAPE button for about 2 seconds allows the TAPE and MD sources to be switched.

^SPEAKER ADJUST button [18, 19]

Press to select speaker setting item.

&AUDIO ADJUST button [29]

Press to adjust bass, treble, late night function and cinema filter function setting.

*VIDEO 3 INPUT jacks [33]

For connecting a video camera or game device.

eMEMORY indicator [25]

Lights up when the MEMORY button is pressed in the radio station preset operation.

fAUTO indicator [24]

Lights up to indicate auto reception mode (stereo/monaural). At this time, interstation noise will be muted (FM only). It extinguishes when the monaural reception mode is started by pressing the FM MODE button.

gFM STEREO indicator [24]

Lights up when an FM stereo broadcast station is received.

hRDS indicator (European models only) [24]

Lights up when a RDS station is received.

iSLEEP indicator [27]

Lights up when the sleep timer is active.

jMulti function display

In usual operation, shows the current input source and volume. When the FM or AM input is selected, it shows the frequency and preset number. When the DISPLAY button is pressed, it shows the current input source and the listening mode.

7