Onkyo AVX-280 instruction manual Connecting the Speaker Cables, Screw-typespeaker terminals

Connecting the Speaker Cables

Screw-type speaker terminals

Strip 1/2" to 5/8" (12 to 15 mm) of insu- 1/2" to 5/8" (12 to 15 mm) lation from the ends of the speaker

cables, and twist the bare wires tightly, as shown.

(Supplied speaker cables are already stripped.)

Using Banana Plugs

•If you are using banana plugs, tighten the speaker terminal before inserting the banana plug.

•Do not insert the speaker code directly into the center hole of the speaker terminal.

Push-type speaker terminals

Strip 3/8" to 1/2" (10 to 12 mm) of insulation from the ends of the	3/8" to 1/2" (10 to 12 mm)
speaker cables, and twist the bare wires tightly, as shown.
(Supplied speaker cables are already stripped.)

The following illustration shows which speaker should be connected to each pair of terminals.

Surround	Surround
right	left
speaker	speaker
		Center speaker
Gray		Blue	Green
Red			White	Purple
Front right		Front left		Subwoofer
speaker A		speaker A
		Speakers A

Front right	Front left
speaker B	speaker B

Speakers B

En

13