Connecting Your Components with HDMI

Game console

TV, projector, etc.

Satellite, cable, set-top box, etc.

Blu-ray Disc/DVD player

Connect your components to the appropriate jacks. The default input assignments are shown below. ✔: Assignment can be changed (➔ 30).

Jack		Signal	Components	Assignable
Input	HDMI IN1	Audio/Video	Blu-ray Disc/DVD player	✔
	HDMI IN2		Satellite, cable, set-top box, etc.	✔
	HDMI IN3		Game console	✔
Output	HDMI OUT		TV, projector, etc.

Refer to “About HDMI” (➔ 51) and “Using an RIHD-compatible TV, Player, or Recorder” (➔ 52).

■Audio return channel (ARC) function

Audio return channel (ARC) function enables an HDMI capable TV to send the audio stream to the HDMI OUT of the AV receiver. To use this function, you must select the TV/CD input selector.

•To use ARC function, you must select the TV/CD input selector, your TV must support ARC function and “HDMI Control” is set to “On” (➔ 34).

Tip

•To listen to audio received by the HDMI IN jacks through your TV’s speakers:

–Set the “TV Control” setting to “On” (➔ 35) for an p-compatible TV.

–Set the “Audio TV OUT” setting to “On” (➔ 34) when the TV is not compatible with por the “TV Control” setting to “Off”.

–Set your Blu-ray Disc/DVD player’s HDMI audio output setting to PCM.

–To listen to TV audio through the AV receiver, see “Connecting Your Components” (➔ 17).

Note

•When listening to an HDMI component through the AV receiver, set the HDMI component so that its video can be seen on the TV screen (on the TV, select the input of the HDMI component connected to the AV receiver). If the TV power is off or the TV is set to another input source, this may result in no sound from the AV receiver or the sound may be cut off.

•When the “Audio TV OUT” setting is set to “On” (➔ 34) to hear from your TV’s speakers, by controlling the AV receiver’s volume, the sound will be output from the AV receiver’s speakers, too. When the “TV Control” setting is set to “On” (➔ 35) to hear from speakers of p-compatible TV, by controlling the AV receiver’s volume, the AV receiver’s speakers will produce sound while the TV’s speakers are muted. To stop the AV receiver’s speakers producing sound, change the settings, change your TV’s settings, or turn down the AV receiver’s volume.