InFocus Secure Digital (SD) & Memory Stick manual Mac Software Installation/Setup

After the presentation is Queued then, you can perform a HotSync to get the presentation into the Palm handheld.

5. Mac Software Installation/Setup

This is only available to Palm-brand handheld users.

Installing the Presenter-to-Go Creation Software.

Important Notice: Close all applications prior to beginning the installation process.

Check that your computer meets the System Requirements for operating system and hardware requirements described in Section 2. Double-click on the Presenter-to-Go Install icon on the Presenter-to-Go CD to install the Presenter-to-Go presentation creation software (and the PowerPoint Add-in.) on your Mac. Re-boot the system after the software installation is complete.

Un-Installing the Presenter-to-Go Creation Software.

When updating software versions, it is recommended that you remove the old creation application software drivers prior to installing the new version. This can be done by following the procedure below:

1.Insert the Presenter-to-Go software CD

2.Double-click on the “Presenter-to-Go Install” icon

3.Click on “Uninstall” in the box that appears.

Installing the Presenter-to-Go & MARGI Mirror Palm software on your handheld.

To install the Presenter-to-Go and MARGI Mirror software on your Handheld device, perform the following steps:

1.Insert the Presenter-to-Go CD.

2.Open the “PTG Handheld Applications” directory.

3.Double click each PRC file to open them with the Palm Desktop Install tool.

4.Perform a Hotsync.

6. Creating Presentations on a Mac

This is only available to Palm-brand handheld users.

Presenter-to-Go presentations can be created directly from within Microsoft PowerPoint® or from any application that has print driver support. The processes are slightly different.

16