InFocus Secure Digital (SD) & Memory Stick Un-Installing the PC Creation Software, Setup Complete

Fig. 3.3: Setup Complete

Click “Finish” and, if registration was selected, you will be brought to the Presenter-to-Go registration page through your internet browser.

Un-Installing the PC Creation Software.

When updating PC software versions, it is recommended that you remove the old PC creation application software prior to installing the new version. This can be done by following the procedure below:

1.Go to Settings/Control Panel/Add/Remove Programs

2.Scroll and highlight MARGI Presenter-to-Go

3.Press the ADD/REMOVE button.

4.Confirm file Deletion by selecting YES

5.The Un-Install Shield will uninstall the program. Answer YES if it asks if you want to remove any no longer used files with the MARGI as part of the name.

6.Un-Install is now complete.

Installing the Presenter-to-Go & MARGI Mirror Palm software on your handheld immediately after PC software installation.

Note: Do not insert the Presenter-to-Go card into your handheld until the Presenter-to-Go

Palm software has been installed.

7