24 | InFocus LiteShow User’s Guide |
|
|
Resetting your LiteShow
To reset your LiteShow to the original factory settings, do the following:
1Remove the LiteShow module from the projector.
Remove the LiteShow module
2Grasp the module in both hands. Press firmly on the ribbed portion of the clear plastic top to disengage the locking tab. The tab is located on the back of the module. Then pull the top off of the module.
Remove the top | Remove the card |
|
3Pull the card out of the slot. Make sure to pull it straight out so you do not bend the connecting pins inside the module.