Multi Tech Equipment MT5634ZBA-V-V92 manual Command #CBF? Callback Failed Attempts Display

MultiModemZBA-V-V92 User Guide		4 AT Commands, S-Registers, & Result Codes
Command: #CBF? Callback Failed Attempts Display
Values:		n/a
Default:		n/a
Description:		Requests the number of failed callback passwords since reset
		or power-up. This number can be stored to nonvolatile memory
		using the &W command.
Command: #CBFR Callback Failed Attempts Reset
Values:		n/a
Default:		n/a
Description:		Resets the number of failed callback passwords to 0. This does
		not reset the number stored in nonvolatile memory.
Command:	#CBIn Local Callback Inactivity Timer
Values:		n = 1–255
Default:		20
Description:		Sets the time (in minutes) that the modem waits for a command
		before forcing the user to enter the setup password again.
Command: #CBNy=x Store Callback Password
Values:		y = 0–29
		x = password
Defaults:		None
Description:		Sets the callback security password for the y memory location.
		The password must have 6 to 10 characters, and cannot in-
		clude the + or - characters.
Command: #CBPn Callback Parity
Values:		n = 0, 1, or 2
Default:		0
Description:		Sets parity for the callback security messages.
	#CBP0 No parity.
	#CBP1 Odd parity.
	#CBP2 Even parity.
Command: #CBRy		Callback Security Reset
Values:		y = 0–29
Default:		None
Description:		Clears the password and phone number in the y memory
		location.
Command: #CBSn Callback Enable/Disable
Values:		n = 0, 1, 2, or 3
Default:		0
Description:	#CBS0 Disables callback security.
	#CBS1 Enables local and remote callback security.
	#CBS2 Enables remote callback security only.
	#CBS3 Disables callback security until local hangup or reset.

38