Multi Tech Equipment MT5634ZBA-V-V92 manual Command #CBFR Callback Failed Attempts Reset

MultiModemZBA-V-V92 User Guide	6 Callback Security
Command: #CBFR Callback Failed Attempts Reset
Values:	n/a
Default:	n/a
Description:	Resets the number of failed callback passwords to 0. This does
	not reset the number stored in nonvolatile memory. This
	command can be used only after the setup password has been
	entered and callback security enabled.
Command: #CBIn Local Callback Inactivity Timer
Values:	n = 1–255
Default:	20
Description:	Sets the time (in minutes) that the modem waits for a command
	before forcing the user to enter the setup password again. This
	command can be used only after the setup password has been
	entered and callback security has been enabled for local/
	remote operation (#CBS1).
Command: #CBNy=x Store Callback Password
Values:	y = 0–29
	x = password (6–10 characters)
Defaults:	None
Description:	Sets the callback security password for the y memory location.
	The password must contain 6 to 10 characters, and cannot
	include the + or - characters. This command can be used only
	after the setup password has been entered and callback
	security enabled.
Command: #CBPn Callback Parity
Values:	n = 0, 1, or 2
Default:	0
Description:	Sets parity for the callback security messages. The parity of
	the messages should match the parity of the computer the
	modem is attached to. This command can be used only after
	the setup password has been entered and callback security
	enabled.

#CBP0 No parity. #CBP1 Odd parity. #CBP2 Even parity.

Command: #CBRy	Callback Security Reset
Values:	y = 0–29
Default:	None
Description:	Clears the password and phone number in the y memory
	location. This command can be used only after the setup
	password has been entered and callback security enabled.

63