Displaying the picture
1. Activate your signal source. Turn the signal source on, and make it send the signal to the projector.
2. Use the VOLUME + / VOLUME - buttons to adjust the volume.
To silence the projector, press the MUTE button on the remote control.
3. Press the SOURCE button on the projector. Each time you press the button, the projector rotates through each input port.
You can also use the remote control to select an input signal.
4. Press the RESIZE button on the remote control. Each time you press the button, the projector rotates through each aspect ratio mode.
5. Use the ZOOM ring to adjust the screen size.
6. Use the FOCUS ring to focus the picture.
7. Turn the VERTICAL adjuster completely
8. Turn the LOCK counter clockwise to loosen the lock of the HORIZONTAL adjuster.
9. Turn the HORIZONTAL adjuster clockwise or
10.Turn the LOCK completely clockwise to tighten it and lock the horizontal lens
position.
(continued on next page)
VOLUME+ button
VOLUME- button
MUTE button
SOURCE button
STANDBY/ON SOURCE MENU
SOURCE button
RESIZE button
FOCUS ring
ZOOM ring
LOCK (horizontal lens position lock)
HORIZONTAL adjuster
VERTICAL adjuster
10