Cleaning and replacing the air filter

Please check and clean the air filter periodically. When the indicators or a message prompts you to clean the air filter, comply with it as soon as possible. The projector air filter consists of a filter cover and a filter unit with two types of filter material. If one or both of the filters are damaged or heavily soiled, replace the filter unit with a new one.

When purchasing a new filter, ask for the following part number from your dealer.

Part number: SP-FILTER-04

Note: A filter unit ships with replacement lamps. Replace the filter unit when you replace the lamp.

1. Turn the projector off, and unplug the power cord. Allow the projector to sufficiently cool down.

2. Use a vacuum cleaner on and around the filter cover.

3. Grab and pull up on the filter cover knobs to loosen the filter.

4. Press the bottom side knobs up slightly to unlock the bottom side of the filter unit. Pull the center knob to take the filter unit off.

5. Use a vacuum cleaner to clean the projector filter vent and the outer side of the filter unit.

6. The filter unit consists of two parts. Press down around the interlocking parts to unlock, and separate the two parts.

7. Use a vacuum cleaner to clean the inner side of each part of the filter unit. If the filters are damaged or heavily soiled, replace them with the new ones.

8. Combine the two parts to reassemble the filter unit.

9. Put the filter unit back into the projector.

(continued on next page)

Filter cover

Filter cover knobs

Filter unit

Filter unit knobs

Interlocking parts