Safety Information
Entries and graphical symbols explanation
The following entries and graphical symbols are used throughout the manuals for safety purposes. Please familiarize yourself with these items and pay particular attention when you see them.
WARNING This entry warns of a risk of serious personal injury or even death. 
CAUTION This entry warns of a risk of personal injury or physical damage.
NOTICE This entry points out important information to keep your projector in working order.
Important safety instruction
The following are important instructions for safely using the product. Always fol- low these instructions when handling the product. The manufacturer assumes no responsibility for any damage caused by mishandling that is beyond normal usage as defined in the manuals for this projector.
WARNING ►Never use the projector if it is acting abnormally (i.e. it is smoking, smelling strangely, has liquid or a foriegn object inside, or is broken, etc.). If such an event should occur, unplug the projector immediately. ►Keep the projector away from children and pets.
►Do not use the projector in the event of thunderstorms.
►Unplug the projector from the power outlet when the projector is not being used.
►Do not open or remove any portion of the projector, unless the manuals specify to do so. Internal maintenance should be left to your dealer and their service personnel.
►Use only accessories specified or recommended by the manufacturer. ►Do not modify the projector or accessories.
►Do not allow liquids or other substances to enter the projector. ►Do not allow the projector to get wet.
►Do not place the projector where any oils, such as cooking or machine oil, are used. Oil may harm the projector, cause the projector to malfunction or cause the projector to fall from its mounted position.
►Do not apply shock or pressure to this projector.
►Do not place the projector on an unstable place such as an uneven surface or leaning table.
►Do not place the projector unstably. Place the projector so that it does not protrude from the surface it is placed on.
►Remove all attachments from the projector, including the power cord and cables, before carrying the projector.
►Do not look into the lens or any projector openings, while the lamp is on. ►Do not go near the lamp door or exhaust vents, while the projection lamp is on. Also if the lamp goes out, do not touch the lamp until it has had time to cool down.
2