Displaying the picture (continued)
CAUTION ►If you want to display a blank screen while the projector's lamp is on:
- Use the BLANK function (see User’s Manual).
Taking any other action may cause the damage to the projector.
NOTE • The RESIZE button does not work when no proper signal is inputted.
• For the details of how to adjust the picture, please see User’s Manual.
ENGLISH
Turning off the power
1. Press the STANDBY/ON button on the projector or the remote control.
The message “Power off?” will appear on the screen for about 5 seconds.
2. Press the STANDBY/ON button again while the message appears.
The projector lamp will go off, and the POWER indicator will begin blinking in orange. Then the POWER indicator will stop blinking and become steady orange after the lamp has cooled.
3. Attach the lens cover, only after the POWER indicator turns steady orange.
STANDBY/ON button
POWER indicator
STANDBY/ON SOURCE MENU
SECURITY
LAMP
TEMP POWER
Do not turn the projector on for 10 minutes or more after turning it off.
Also, do not turn the projector off shortly after turning it on. Such operations might cause the lamp to malfunction or shorten the lifetime of some parts including the lamp.
WARNING ►Do not touch any areas around the lamp door or the exhaust vents during use or just after use, since it is too hot.
►Remove the power cord to remove power completely. The power outlet should be close to the projector and easily accessible.
NOTE • Please power off the projector after all connected devices are powered off.
•This projector has an AUTO POWER function that can make the projector turn off automatically. For more information, please see User’s Manual.
11