Garmin TR-1 owner manual Display Elements

Page 9

Display Elements:

The Three large digits on the display show the current heading in degrees. (See Figure 10)

Figure 10

If the autopilot is in calibration mode, (Autotune, Compass Calibration, or rudder calibration) the three digits will display “CAL”.

Figure 11

The Three smaller digits display a horizontal bar (See Figure 12) if the heading command mode is available.

Figure 12

It will display the new commanded heading (desired heading) (See Figure 13) if the operator has turned the control knob while the heading command mode is active. The display is blank otherwise.

Figure 13

Page 8

Image 9
Contents TR-1 Gladiator Introduction Safety Tools required Installation of Basic LCD DisplayMounting the Display Unit Multi-Mount Panel InstallationConnecting the Display Wiring Connecting the Display With Wireless Remote LED Backlight Control Operating the DisplayDisplay Elements Heading Command Display Rate of Turn Command Dial Rudder Calibration Rudder Position Display
Related manuals
Manual 53 pages 31.36 Kb Manual 48 pages 48.1 Kb