InFocus ScreenPlay 7210 manual Connecting a computer, Support

Page 12

Connecting a computer

connect computer cable

M1-DA 1

Connect either a VESA cable or M1 cable into the appropriate connector on the projector. Connect the other end to the video port on your computer. If you are using a desktop computer, you first need to disconnect the monitor cable from the computer’s video port.

vesa 2	7	D5 8	trigger 1
	video
			trigger 2
serial control	4
	5
	s-video
3	6
component	component

Connect the power cable to the connector on the back of the projector and to	connect power cable
your electrical outlet.	connect power cable
The Power LED on the projector’s keypad turns solid green.
NOTE: Always use the power cable that shipped with the projector.
Turn on the projector, then your computer.

M1-DA 1	vesa 2	7	D5 8	trigger 1
		video
				trigger 2
	serial control	4
		5
		s-video
	3	6
	component	component

You can control the projector from an LCD control panel or computer by	connect RS-232 cable
connecting an RS-232 cable to the projector’s Serial connector. Specific
RS-232 commands can be found in the Appendix starting on page 38 and in
the Service and Support section of our website at www.infocushome.com/
support.

M1-DA 1	vesa 2	7	D5 8	trigger 1
		video
				trigger 2
	serial control	4
		5
		s-video
	3	6
	component	component

11

Image 12

Contents User’s Guide Declaration of Conformity TrademarksFCC Warning CanadaTable of Contents Important Operating Considerations Product specifications AccessoriesProjector components and features IntroductionConnector Panel Positioning the projector Video connections Video connectionsConnecting a video device Connecting the power cableDisplaying a video image ? No startup screen? Get help onSharpness are produced Connecting a computer SupportTroubleshooting your setup Power SaveShutting down the projector LED behavior and meaningZoom Adjust keystone on keypad or Keystone Color Blinks Red No computer image, just the words Signal out of range Or restartLaptop Presentation does not play on the screen Still having problems? Using the keypad buttons Using the remote control Troubleshooting the remoteOptimizing video images Customizing the projectorUsing the menus Picture menu Image input Letterbox image input Save User Presets Gamma Overscan Advanced settings Color Space Color Temperature Color Control Video Standard Settings menu SystemSystem menu Startup logo Blank Screen Language Maintenance Cleaning the lensReplacing the projection lamp Resetting the lamp timer Using the security lockRed LED behavior and projector errors AppendixProjected image size Red LEDsSource compatibility Source CompatibilityProjector Inputs and Outputs Projector dimensions for ceiling mount installations RS-232 terminal specifications Communication configurationCommand format Setting ValueSupported commands Function Command Range DefaultNPE Numerics LED Page Limited Warranty Projector Product Limited Warranty Period Excluding LampsLimited Warranty Period To Be Eligible For Limited Warranty CoverageTo Obtain Warranty Service