Speaker setup

Connecting to an external audio system

Option 1

Option 2

Option 3

 

 

 

 

 

Stereo amplifier

5.1 Channel analog

 

 

Dolby digital decoder

audio input

 

amplifier audio input

 

audio input

or

DVD Player audio

DVD Player audio

DVD Player digital

output (2 channel)

output (multi-channel)

audio output

Speaker setup includes Downmix, Centre, Rear, Subwoofer, Centre Delay, Rear Delay and Test Tone.

Downmix - If you have connected a stereo amplifier, you should select Stereo, if your amplifier is 5.1 please set as OFF.

Centre speaker - Switch the centre speaker ON or OFF. Rear speaker - Switch the rear speakers ON or OFF. Subwoofer - Switch the subwoofer ON or OFF.

Centre Delay - Allows the centre speaker output to be delayed. Rear delay - Allows delaying rear speaker output.

Test tone - Choose the corresponding speaker layout. A test sound will be sent to each speaker.

Audio setup

Audio out - Selects an audio output mode: Analogue, SPDIF/RAW or SPDIF/PCM.

Notes:

This unit supports both Dolby digital or analogue audio.

If your unit doesn't support DTS mode, you should select SPDIF/RAW or SPDIF/PCM to play DTS discs.

Some models support Dolby AC-3 and DTS. The unit sets the corre- sponding mode automatically.

OP Mode - Switch between RF and Line Out mode.

Dual Mono - If your amplifier/decoder already supports Dolby Digital output, you can select Stereo, L-mono, R-mono, MIX-mono for your amplifier/decoder.

Compression - To adjust the sound dynamic range.

LPCM output - You can select 48k or 96k audio encoding modes.

Preferences setup

Not accessible during display. The Preferences page includes TV display, TV type, Audio, Subtitle, Disc menu, Local, Parental, Password and Defaults.

TV display - If you have a widescreen TV (16:9 Aspect Ratio) select WIDE/HDTV. Use one of the NORMAL options for any other screen type.

TV Type - The preferred setting in most European countries is PAL. Audio - Select your preferred language.

Subtitle - Select your preferred language. Disc menu - Select your preferred language. Locale - Select your locale.

Parental - Select a level of Parental lock.

Password - The default password is 2001. You can change it using this option.

10 - Setting up your DVD player

Page 10
Image 10
Packard Bell DVX 460 manual Speaker setup, Audio setup, Preferences setup, Connecting to an external audio system, Option