SETTING UP YOUR DVD PLAYER
Box contents
1.Packard Bell DVX 460 USB DVD player
2.Remote control
3.Remote control Batteries
4.User’s Guide & Service Guide
General Connections
Make sure that each device is turned off before connect- ing.
DVD player and TV set
See also the Quickstart Setup section at the start of this guide.
Depending on the connectors that are available on your TV set, you may need additional cable(s). Please check your TV’s documentation for more information.
You may need to use the Video Out and DIsplay Mode buttons to set the video output mode correctly.
DVD player and VCR
DVD player and Y Cb/Pb Cr/Pr or SCART
To connect to a TV using HDTV mode (with compatible TV only):
1.Connect the DVD player to your TV set using the Y Cb/Pb Cr/Pr and YUV connectors.
2.Set the TV to HDTV mode (see your TV’s user documentation for how to do this).
3.Press the remote control Video Out button repeatedly to select 'CVBS+YUV'.
4.Press the 'Progressive Scan' button twice to switch to HDTV 720P mode.
GENERAL FUNCTIONS
Screen display (OSD) - When the unit plays a disc, press the OSD button to browse through several options.
For DVD discs - Press the OSD button repeatedly to show the remaining time, elapsed time and chapter time.
Press once again to switch off the OSD display.
For DivX, XVID and Mp3 discs - Press the OSD button repeatedly to show the elapsed time of a chapter and the remaining chapter time.
Press once again to switch off the OSD display.
Language - Press the Language button to select any of the languages supported on the disc.
Angle - If the disc you are playing supports this function, use this button to select your preferred viewing angle.
