Using the audio
To play sound from the projector, connect your source to the Audio In con- | connect audio connectors on A/V cable |
nector on the projector. |
|
To adjust the volume, mute or turn off the projector’s chime, use the Audio |
|
menu (see page 28). |
|
Troubleshooting audio
If there is no sound, check the following:
• | Make sure the audio cables are connected. | adjust volume |
• | Make sure mute isn’t active in the Audio menu. |
|
•Make sure the volume is turned up enough.
•Adjust the audio source.
•If playing a video, make sure the playback has not been paused.
Y | Pb | Pr | trigger |
|
|
| audio in |
serial control
21