InFocus Essential Connector Information for Your Projector

Connector Panel

The projector provides two computer and four video connectors:

•one M1-D/A (HD, DVI, and computer)

•one VESA (HD, HD component, and computer)

•one S-video

•one composite RCA

•one component video

It also has an RS-232 serial connector for serial control. The Command Line Interface (CLI) specifications and commands are on our website.

A 3.5mm mini-jack trigger provides 12 volt current. This provides a con- stant output while the projector is on. For example, if you connect your pro- jection screen to the trigger, when you turn on the projector the screen will move down; when you turn the projector off, the screen will return to the storage position.

You must turn the trigger on in the System menu, see page 28.

Connector panel

		component
		video		audio	trigger
VESA	M1-D/A		s-video

Y	Pb	Pr	trigger
			audio in

serial control

	composite	lock
		power
RS232 serial control	video
		connector

+12v

ground

3.5mm mono plug for 12 volt current connection

to screen relay (see screen manufacturer for details)

5