3Start a web browser on your computer.
4Enter the projector's IP address or host name (preceded by http://) into the web browser's address bar. Example: If the IP address is 192.168.1.10, enter http://192.168.1.10 into the browser's address bar.
5The Log In to Projector Control page will be shown in the browser.
6Select Access type: Basic User or Administrator.
7Click Log In.
Navigating Projector Web Pages
The left side of every page shows a navigation bar. Click the links in the navigation bar to go to different projector web pages.
NOTE: If a Basic User is logged in, no links are shown.
The top of the navigation bar shows the projector name, model, and serial number.
The web pages also include the following options:
•Log Off: Logs off and returns to the Log In page (see above).
•Refresh: Reloads the page with current status.
•Defaults: Displays default (factory settings) values (to save these values click Apply).
•Apply: Saves the values that are currently shown on the page.
Projector Controls Page (All users)
This page lets you control the same settings that are available via the projec- tor's main menu and remote control. The Controls tab includes basic remote control functions; other tabs correspond to the projector's menus. NOTE: If a Basic User is logged in, only the Controls, Basic Picture, and Advanced Pic- ture tabs are shown.
In each tab, the current value of each setting is shown in blue color.
NOTE: Unlike other pages, changes you make to Projector Control settings are applied immediately.
•To change an on/off setting (e.g. Power): Click the corresponding On or Off button.
•To change a
•To change a numeric setting (e.g. Brightness): Click the corresponding + or - button, or select a value from the
•To perform a command (e.g. Auto Image): Click the corresponding Exe- cute button.
Network Settings Page (administrators only)
This page lets you view and change the projector's network settings. Con- sult with your network administrator before making any changes on this page; incorrect network configuration of the projector may cause problems on your network.
Projector Name: The name of the projector shown in the projector's web pages.
IP Address: These settings control the projector's network configuration. Enter the appropriate settings required for your specific network.
Advanced Network Settings: Click this link to show advanced settings:
802.1x Authentication: If your network requires 802.1x authentication, enter the user name and password that the projector should use, and select the authentication type.
SNMP: If your network uses SNMP, enter necessary SNMP information here.
Command and Control
34