InFocus M2100 manual Positioning the projector, IN2112 SVGA and IN2114 XGA, IN2116 WXGA

Page 7
Positioning the projector

Positioning the projector

To determine where to position the projector, consider the size and shape of your screen, the location of your power outlets, and the distance between the projector and the rest of your equipment. Here are some general guidelines:

Position the projector on a flat surface at a right angle to the screen. The projector must be at least 4.9’ (1.5m) from the projection screen.

Position the projector within 10’ (3m) of your power source and within 6’ (1.8m) of your video device (unless you purchase extension cables). To ensure adequate cable access, do not place the projector within 6” (.15m) of a wall or other object.

Position the projector to the desired distance from the screen. The distance from the lens of the projector to the screen, the zoom setting, and the video format determine the size of the projected image.

The image exits the projector at a given angle. This image offset is 115%. This means that for an image 10’ high, the bottom of the image will be 1.15’ above the center of the lens.

Table 1: IN2112 (SVGA) and IN2114 (XGA)

Range of distance to the screen for a given screen size

 

 

Distance to screen

 

Diagonal Screen

Minimum distance

Maximum Distance

Size (inches/m)

(feet/m)

(feet/m)

 

 

 

60”/1.52m

6.48'/1.98m

7.80'/2.38m

80”/2.03m

8.64'/2.63m

10.40'/3.17m

90”/2.29m

9.72'/2.96m

11.70'/3.57m

150”/3.81m

 

16.20'/4.94m

19.50'/5.94m

 

 

 

 

 

Table 2: IN2116 (WXGA)

Range of distance to the screen for a given screen size

 

 

Distance to screen

 

Diagonal Screen

Minimum distance

Maximum Distance

Size (inches/m)

(feet/m)

(feet/m)

 

 

 

60”/1.52m

6.21’/1.89m

7.74’/2.36m

80”/2.03m

8.34’/2.54m

10.36’/3.16m

90”/2.29m

9.40’/2.86m

11.68’/3.56m

150”/3.81m

 

15.77’/4.81m

19.55’/5.96m

 

 

 

 

 

6

Image 7
Contents Regulatory models V2000, M2100 IN2112, IN2114, IN2116Canada Declaration of ConformityTrademarks FCC WarningTable of Contents Important Operating Considerations for Safety Online registration Product specificationsOptional Accessories Introduction5 volt DC output Connector panelTable 2 IN2116 WXGA Positioning the projectorTable 1 IN2112 SVGA and IN2114 XGA Range of distance to the screen for a given screen sizeCeiling Mount Connecting a computer source Connecting powerVGA connection Connect audio cable Connect monitor cable Connect USB cable Optional computer connectionsNo start up screen? Get help on page Displaying an imageAdjusting the image S-video connection Connecting a video deviceVideo device connections Composite video connection43 screen What is Aspect Ratio?169 screen 43 mode 169 mode Native mode Screen Save Time Troubleshooting your setupTable 3 Status indicator light behavior and meaning Shutting down the projectorpress power button Problem No start up screenSolution Plug power cord into the projector thenOnly my laptop’s background appears, not the ProblemNo computer image, just the words “Signal out of range” A AImage clear and not cropped Panel Display Settings tabMove projector and adjust zoom Image fuzzy or croppedImage does not fit 43 or 169 screen Problem Image not square Image not sharpAdjust Keystone in the Basic Picture menu Adjust Sharpness in the Basic Picture menuImage upside down Turn off Ceiling Mount in Setup menuTurn off Rear Project in Setup menu Adjust color, tint, brightness, contrast in the Basicdoes not play on the screen Startup ScreenTurn off the internal LCD display on your laptop Embedded video plays correctlyStill need assistance? won’t turn on, Lamp light is turned onTop front cover Replace lampTroubleshooting the remote Using the remote controlTroubleshooting Audio Using the audioUsing the projector’s speakers Connecting external speakersPresentation features Using the keypad buttonsOptimizing computer images Customizing the projector Optimizing video imagesDynamic Messaging Using the menus Basic Picture menu Advanced Picture menu Setup menu Keypad Enable Enables or disables keypad Disable Snapshot Allows the user to disable the snapshot capabilityFast Color Refresh Controls color wheel speed To change the PIN To enter the PIN at projector startupIf you lose or forget your custom PIN Help Status and Service menuIf Using a Network that Does Not have DHCP Enabled Before using the network functionsConfiguring and Controlling the Projector via a Web Browser If Using a Network with DHCP EnabledNavigating Projector Web Pages Network Settings Page administrators onlyProjector Controls Page All users Date/Time Settings Page administrators only Event Notifications Page administrators onlyScheduled Tasks Page administrators only Troubleshooting Network Functions Security Settings Page administrators onlySystem Log Page administrators only Network Utilities Page administrators onlyViewing a Slide Show Using LitePort IN2114 & IN2116 onlyUsing the LitePort Menu Image File TypesDisplaying PowerPoint Slides Troubleshooting LitePort Cleaning the lens MaintenanceWARNINGS Turn off and Replacing the projection lampunplug projector Using the security lock Numerics INDEXU USB zoom Viewing a Slide Show 37 Volume button W warranty