S e t t i n g | u p | t h e | P r o j e c t o r |
|
|
|
|
NOTE: If you are connecting an older Macintosh computer that does not have a
NOTE: The projector must be turned on to display the image on your monitor.
Connecting a Desktop Computer
1Locate the cable that connects your monitor to your computer. Unplug it from the computer.
2Plug the 
end of the CableWizard cable into the monitor connector on your computer.
FIGURE 9
Connecting the CableWizard cable to a desktop computer
Do you want to display the image on your computer’s monitor as well as on the projection screen?
1Plug your monitor’s cable into the 
connector on the CableWizard.
Do you want to play your computer’s audio on the projector?
1Unplug the audio cable, if present, from your computer.
2Plug either end of the CableWizard audio cable into the audio connector on your computer.
3Plug the other end of the audio cable into the 
connector on the CableWizard.
12