InFocus LPTM425z warranty Problem Image is too wide or narrow for screen

Page 44

•You might need to turn everything off and power up the equipment again in the proper order. Refer to your com- puter’s documentation to determine the correct order.

•Make sure your laptop’s external video port is turned on. See the “Portable and Laptop Activation Chart” on page 49 or your computer’s manual for details.

•Make sure your computer’s video board is installed and con- figured correctly.

If you’re using Windows 3.x:

1In the Windows Program Manager, double-click the Win- dows Setup icon in the Main program group.

2Verify that the Display setting is 1024x768 or less.

If you’re using Windows 95:

1Open “My Computer” icon, the Control Panel folder and then the Display icon.

2Click the Settings tab.

3Verify that the Desktop area is set to 1024x768 or less. Also check the following:

•Does your computer have a compatible video board? The pro- jector isn’t CGA or EGA compatible.

•Is your computer’s video port activated? This is especially true for laptop computers. See “Portable and Laptop Activa- tion Chart” on page 49.

Problem: Image is too wide or narrow for screen

•You might need to manually adjust the tracking to reduce or enlarge the projected image. Refer to “Manual Tracking” on page 29.

•Adjust the resolution of your video card if it’s greater than 1024x768.

41

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Table of Contents Appendix IndexSafety Instructions F e t y S t r u c t i o n s Image Resolution IntroductionDiately if anything is missing CompatibilityUnpacking the Projector Shipping box contents Side view of projector Usage Guidelines If You Need AssistanceWarranty Setting UP the Projector Connecting the CableWizard3 to the Projector Preparing to Connect Your Equipment to the Projector Equipment you want to connectConnecting a Laptop Computer Audio cable Mouse cable Connecting a Desktop Computer Audio cable Mouse cable Monitor cable Connecting a Video Player Video cable Cable Powering up the Projector and Adjusting the Image Turning Off the Projector Using the Remote Control Using the ProjectorBasic Image Adjustment I n g O j e c t o r Adjusting the Projector Using the Keypad and Remote Buttons Standby Using the On-Screen Menus Display Menu Color Audio Menu Image Menu Manual Tracking, Horiz. Posi Controls Menu Rear Projection Language Menu Status Menu Indicates the active source, Computer or Video Replacing the Projection Lamp Maintenance & TroubleshootingCleaning the Lens Pull the lamp door up and remove it Remove the module Figure Replacing the Batteries in the Remote Control Using the Kensington Lock Troubleshooting Problem Nothing on projection screen Problem Color or text not being projectedProblem The screen resolution is not right Problem Image isn’t centered on the screenProblem Image is too wide or narrow for screen Problem Image is out of focus Problem Image and menus are reversed left to rightProblem no sound Problem Image is noisy or streakedProblem Lamp seems to be getting dimmer Problem Lamp shuts offSpecifications AppendixP e n d i Accessories Standard Accessories Ship with the projector Part NumberOptional Accessories Portable and Laptop Activation Chart Key command to Computer Activate port De-activate portFN-F6 FN-F4 FN-F1 FN-F2 FN-F1 FN-F7 FN-F5 Using Video Mirroring with a PowerBook Computer Projected Image Size Image Size, Width and Height for LP435z-maximum image size Index D e Page D e
Top Page Image Contents