InFocus LPTM425z warranty Status Menu

Page 36

Status Menu

This is a read-only window for informational purposes. To dis- play the status window, select Show status from the menu, then click either mouse button. To remove the window, click either mouse button.

FIGURE 23

Status menu

Lamp hours used

Indicates how many hours the current lamp has been in use. The counter starts at zero hours and counts each hour the lamp is in use. Change the bulb when the brightness is no longer accept- able. See “Replacing the Projection Lamp” on page 35 for details.

Computer resolution

Shows your computer’s resolution setting. To change this, go to your computer’s Control Panel and adjust the resolution in the Display tab. See your computer’s user’s guide for details.

Horizontal refresh rate

The time period that one horizontal line is displayed.

Vertical refresh rate

The time period that one video frame is displayed.

Mute status

Indicates if the audio is muted.

33

Image 36

Contents Table of Contents Appendix IndexSafety Instructions F e t y S t r u c t i o n s Image Resolution IntroductionCompatibility Unpacking the ProjectorDiately if anything is missing Shipping box contents Side view of projector Usage Guidelines If You Need AssistanceWarranty Setting UP the Projector Connecting the CableWizard3 to the Projector Preparing to Connect Your Equipment to the Projector Equipment you want to connectConnecting a Laptop Computer Audio cable Mouse cable Connecting a Desktop Computer Audio cable Mouse cable Monitor cable Connecting a Video Player Video cable Cable Powering up the Projector and Adjusting the Image Turning Off the Projector Using the Projector Basic Image AdjustmentUsing the Remote Control I n g O j e c t o r Adjusting the Projector Using the Keypad and Remote Buttons Standby Using the On-Screen Menus Display Menu Color Audio Menu Image Menu Manual Tracking, Horiz. Posi Controls Menu Rear Projection Language Menu Status Menu Indicates the active source, Computer or Video Maintenance & Troubleshooting Cleaning the LensReplacing the Projection Lamp Pull the lamp door up and remove it Remove the module Figure Replacing the Batteries in the Remote Control Using the Kensington Lock Troubleshooting Problem Nothing on projection screen Problem Color or text not being projectedProblem The screen resolution is not right Problem Image isn’t centered on the screenProblem Image is too wide or narrow for screen Problem Image is out of focus Problem Image and menus are reversed left to rightProblem no sound Problem Image is noisy or streakedProblem Lamp seems to be getting dimmer Problem Lamp shuts offSpecifications AppendixP e n d i Accessories Standard Accessories Ship with the projector Part NumberOptional Accessories Portable and Laptop Activation Chart Key command to Computer Activate port De-activate portFN-F6 FN-F4 FN-F1 FN-F2 FN-F1 FN-F7 FN-F5 Using Video Mirroring with a PowerBook Computer Projected Image Size Image Size, Width and Height for LP435z-maximum image size Index D e Page D e