InFocus LPTM425z warranty Problem Lamp seems to be getting dimmer, Problem Lamp shuts off

Page 46

Problem: Projected colors don’t match the computer or video player’s colors

•Just as there are differences in the displays of different moni- tors, there are often differences between the computer image and the projected image. Adjust the brightness, tint and/or contrast from the Display menu. See “Brightness” on page 25, “Tint” on page 25 and “Contrast” on page 25.

Problem: Lamp seems to be getting dimmer

•The lamp begins to lose brightness when it has been in use for a long time. Replace the lamp as described in “Replacing the Projection Lamp” on page 35.

Problem: Lamp shuts off

•A minor power surge may cause the lamp to shut off. Turn the projector off, wait at least a minute, then turn it back on.

The most current troubleshooting information can be found in the Service and Support section of our website at

http://www.infocus.com/service.

Before calling your dealer or InFocus Technical Support for assis- tance, please have the following information available:

•the projector’s serial number (located on the bottom label)

•the resolution of your computer.

Call InFocus Technical Support at 1-800-799-9911between 6 a.m. and 6 p.m. PST, Monday through Friday. Service is available in North America after hours and on weekends for a fee at 1-888-592-6800.

In Europe, call InFocus in The Netherlands at (31) 35-6474010between 8 a.m. and 6 p.m. Central European Time.

In Asia, call (65) 332-0659between 9:30 a.m. and 5:30 p.m.

Or, send us an e-mail at techsupport@infocus.com

43

Image 46

Contents Table of Contents Appendix IndexSafety Instructions F e t y S t r u c t i o n s Image Resolution IntroductionUnpacking the Projector CompatibilityDiately if anything is missing Shipping box contents Side view of projector Usage Guidelines If You Need AssistanceWarranty Setting UP the Projector Connecting the CableWizard3 to the Projector Preparing to Connect Your Equipment to the Projector Equipment you want to connectConnecting a Laptop Computer Audio cable Mouse cable Connecting a Desktop Computer Audio cable Mouse cable Monitor cable Connecting a Video Player Video cable Cable Powering up the Projector and Adjusting the Image Turning Off the Projector Basic Image Adjustment Using the ProjectorUsing the Remote Control I n g O j e c t o r Adjusting the Projector Using the Keypad and Remote Buttons Standby Using the On-Screen Menus Display Menu Color Audio Menu Image Menu Manual Tracking, Horiz. Posi Controls Menu Rear Projection Language Menu Status Menu Indicates the active source, Computer or Video Cleaning the Lens Maintenance & TroubleshootingReplacing the Projection Lamp Pull the lamp door up and remove it Remove the module Figure Replacing the Batteries in the Remote Control Using the Kensington Lock Problem The screen resolution is not right Troubleshooting Problem Nothing on projection screenProblem Color or text not being projected Problem Image isn’t centered on the screenProblem Image is too wide or narrow for screen Problem no sound Problem Image is out of focusProblem Image and menus are reversed left to right Problem Image is noisy or streakedProblem Lamp seems to be getting dimmer Problem Lamp shuts offSpecifications AppendixP e n d i Accessories Standard Accessories Ship with the projector Part NumberOptional Accessories Portable and Laptop Activation Chart Key command to Computer Activate port De-activate portFN-F6 FN-F4 FN-F1 FN-F2 FN-F1 FN-F7 FN-F5 Using Video Mirroring with a PowerBook Computer Projected Image Size Image Size, Width and Height for LP435z-maximum image size Index D e Page D e