InFocus LP 850 Connecting a video device, Standard video connections, Optional video connections

Connecting a video device

connect A/V cable

Standard video connections

Plug the audio/video (A/V) cable’s yellow connector into the video-out connector on the video device. Plug the other yellow connector into the yel- low Video 3 connector on the projector. Plug a white connector into the left audio out connector on the video device and plug a red connector into the right audio out connector on the video device. Plug the remaining white connector into the left audio in connector on the projector (to the right of the yellow Video 3 connector), and plug the red connector into the right audio in connector on the projector.

Connect the black power cable to the connector on the back of the projector	connect power cable
and to your electrical outlet. NOTE: Always use the power cable that
shipped with the projector.

Optional video connections

If the video device uses a round, four-prong S-video connector, plug an	connect S-video and video cables
S-video cable (sold separately) into the S-video connector on the video
device and into the Video 2 connector on the projector. Use the A/V cable’s
audio connectors as described directly above (the yellow connectors on the
A/V cable are not used).
If the video device uses component cable connectors (sold separately), plug
the cable’s green connectors into the green component-out connector on the
video device and into the Video 1 green component connector (labeled “Y”)	connect component cables
on the projector. Plug the component cable’s blue connectors into the blue	and video cables
component-out connector on the video device and into the blue component
connector (labeled “Pb”) on the projector. Plug the component cable’s red
connectors into the red component-out connector on the video device and
into the red component connector (labeled “Pr”) on the projector. Use the
A/V cable’s audio connectors as described above (the yellow connectors on
the A/V cable are not used). NOTE: The component connectors can be used
for HDTV sources (480i, 480p, 720p and 1080i formats).

14