InFocus LP 850, LP 840 manual Connecting a computer, Required computer connections

Connecting a computer

connect computer cable

Required computer connections

Connect one end of the VESA computer cable to the Computer 2 connector on the projector. Connect the other end to the video port on your computer. If you are using a desktop computer, you first need to disconnect the moni- tor cable from the computer’s video port.

Connect the black power cable to the connector on the back of the projector	connect power cable
and to your electrical outlet.
NOTE: Always use the power cable that shipped with the projector.

Optional computer connections

	To control your computer’s mouse using the projector’s remote control, con-	connect M1-D cable
	nect the USB and DVI cables to the USB and DVI ports on your computer,
	and connect the other end to the Computer 1 (M1-D) connector on the pro-
	jector. USB drivers must be installed to use the USB feature. For more infor-
	mation, see page 12.
	If your projector cannot receive the remote’s signal due to IR interference,	connect wired remote
	you can connect directly to the projector via a remote cable. To do so, plug
	the remote cable into the wired remote connector on the projector. Plug the
	other end into the connector on the remote,
.
	To have sound with your presentation, connect the audio cable to your com-	connect audio cable
	puter and to the corresponding computer Audio In connector on the projec-
	tor.

8