InFocus LP 850, LP 840 manual Advanced settings

Page 34

Advanced settings

Sharpness: (video sources only) changes the clarity of the edges of a video image. Select a sharpness setting.

Color Space: This option applies to computer and component video sources. It allows you to select a color space that has been specifically tuned for the input signal. When Auto is selected, the projector automatically determines the standard. To choose a different setting, turn off Auto, then choose RGB for computer sources, choose either SMPTE240, REC709 or REC601 for component video sources.

Color Temperature: changes the intensity of the colors. Select a listed value, or select User and individually adjust the intensity of the red, green, and blue colors.

Video Standard: when set to Auto, the projector attempts to automatically pick the video standard based on the input signal it receives. (The video standard options may vary depending on your region of the world.) If the projector is unable to detect the correct standard, the colors may not look right or the image may appear “torn.” If this happens, manually select a video standard by selecting NTSC, PAL, or SECAM from the Video Stan- dard menu.

Overscan: (video sources only) removes noise around the video image.

The following 4 options are for computer sources only.

Phase: adjusts the horizontal phase of a computer source.

Tracking: adjusts the vertical scan of a computer source.

Horizontal / Vertical Position: adjusts the position of a computer source.

Sharpness

Color Space

Color Temperature

Video Standard

34

Image 34
Contents USER’S Guide Trademarks Table of Contents Important Operating ConsiderationsPage Introduction AccessoriesProjector components and features back Online RegistrationConnector Panel Positioning the projector Required computer connections Connecting a computerOptional computer connections Visit our website for information on ProjectorNet Displaying a computer image First-time projector use with Windows Wizard launches two times For Windows 2000, Windows ME, and Windows XPAdjusting the image Standard video connections Connecting a video deviceOptional video connections Connect BNC cables Displaying a video image You can also adjust the zoom and focus via the menus. See Shutting down the projector Troubleshooting your setupPower Save Screen SaveSolution Computer image projectedRange Out Image clear and not cropped Page Color Lamp won’t turn on, Lamp LED blinking red Lamp won’t turn on, Temp LED solid redLamp must be replaced Lamp turns on Still having problems? Using the keypad buttons Using the remote control Troubleshooting the remoteTroubleshooting audio Using the audioConnecting external speakers Presentation features Optimizing computer imagesOptimizing video images Customizing the projectorUsing the menus Picture menu Presets Advanced settings Settings menu Save Screen PiP Enable PiP Position Effect Key Network Cleaning the lens MaintenanceChanging the lens Lamp module is on the right Resetting the lamp timer Using the security lock Cleaning the dust filterTroubleshooting Appendix Projected image sizeDistance Image Width 2.3 25/7.6 LED Behavior LED color/behavior MeaningCommand Format RS-232 commandsCommunication Configuration Setting ValueError Conditions Limitations= Japanese = Korean = Portuguese = Russian = Norwegian NND Ntsc Function Com Min Max Step Mand Fault Numerics Page XGA Limited Warranty Warranty Limitation and ExclusionTo Be Eligible For Limited Warranty Coverage Limited Warranty PeriodTo Obtain Warranty Service If YOU Need ASSISTANCE… USER’S Guide
Related manuals
Manual 50 pages 52.79 Kb