Onkyo 29344934 instruction manual Making Hdmi Connections, Tip

Page 27

Connecting the AV receiver—Continued

Making HDMI Connections

If you have an HDMI-compatible player, you can connect it to the AV receiver with an HDMI cable.

Step 1: Connect your HDMI-compatible TV to the AV receiver’s HDMI OUT jack.

Step 2: Connect your HDMI-compatible player to the AV receiver’s HDMI IN 1, 2, or 3 jack.

Step 3: Connect your HDMI-compatible player to an analog and/or digital audio input on the AV receiver.

■Audio Signals

•Audio and video signals received via inputs other than the HDMI IN jacks are not output by the HDMI OUT.

•Audio and video signals received via the HDMI IN jacks are output only by the HDMI OUT.

•To watch an HDMI source that’s connected via the AV receiver’s HDMI jacks, the AV receiver must be turned on, otherwise no HDMI signal will be output.

•If you want to listen through the speakers connected to the AV receiver, in addition to an HDMI connection, you’ll also need to make a separate analog or digital audio connection.

HDMI

 

HDMI

OUT

 

IN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Step 2

Step 1

 

 

DVD/BD player

Step 3

Connect one or the other

TV

Tip!

If you make the connection described in step 3, to fully enjoy the AV receiver's listening modes, turn down the volume on your TV all the way so that its speakers output no sound.

Sound off

Notes:

•The HDMI video stream is compatible with DVI (Digital Visual Interface), so TVs and displays with a DVI input can be connected by using an HDMI-to-DVI adapter cable. (Note that DVI connections only carry video, so you’ll need to make a separate connection for audio.) However, reliable operation with such an adapter is not guaranteed. In addition, video signals from a PC are not supported.

•When listening to an HDMI component through the AV receiver, set the HDMI component so that its video can be seen on the TV screen (on the TV, select the input of the HDMI component connected to the AV receiver).

•The HDMI audio signal (sampling rate, bit length, etc.) may be restricted by the connected source component. If the picture is poor or there’s no sound from a component connected via HDMI, check its setup. Refer to the connected component’s instruction manual for details.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents HT-S5200 Avis Important Safety InstructionsBatteries and Heat Exposure Warning PrecautionsPower Preventing Hearing Loss CautionPackage Contents Speaker PrecautionsPackage Contents Speaker Sets a and B Using Two Sets of SpeakersConnections FeaturesAmplifier ProcessingFeatures Contents Front Panel Front & Rear PanelsDisplay Front & Rear PanelsRear Panel Subwoofer PRE OUT CBL/SATVCR/DVR IN/OUT DVD/BDSubwoofer SKW-570 Speaker PackageSpeaker Package Keyhole slotsSpeaker terminals Controlling the AV receiver Remote ControllerRemote Controller Installing the BatteriesAiming the Remote Controller Enjoying Home Theater Connecting the AV receiverConnecting the AV receiver Speaker ConfigurationSpeaker Connection Precautions Connecting Speaker Set B Connecting Speaker Set aUsing the Rubber Stoppers for a More Stable Platform Using the Floor Pads for SubwooferWall Mounting Attach the FM antenna, as shown Connecting AntennaConnecting the Indoor FM Antenna Connecting the AM Loop AntennaConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaUsing a TV/FM Antenna Splitter About AV Connections Optical Digital Jacks AV Connection Color CodingAV Cables and Jacks Audio Connection Formats Connecting Audio and Video Signals to the AV receiverWhich Connections Should I Use? Video Connection FormatsPass-Thru Connecting Components with HdmiAbout Hdmi About Copyright ProtectionTip Making Hdmi ConnectionsHint Connecting a TV or ProjectorVideo Connection Audio ConnectionConnecting a DVD/BD player Connecting a VCR or DVR for Playback Make the audio connection a Connecting a VCR or DVR for RecordingSatellite, cable, set-top box, etc Connecting a Camcorder, Game Console, or Other Device Connecting a Portable Audio playerMake the video connection a Make the audio connection a CD Player or Turntable MM with Built-in Phono Preamp Step Connecting a CD Player or TurntableConnecting a Cassette, CDR, MiniDisc, or DAT Recorder If Your iPod Supports Video Connecting an RI DockConnecting the Supplied UP-A1L Dock Not all iPod models output videoDirect Change Connecting Onkyo u ComponentsConnecting the Power Cord Auto Power On/StandbyDid you connect an Onkyo MD recorder or CD recorder? Turning On the AV receiverTurning On and Standby Up and Running in a Few Easy StepsFirst Time Setup Audyssey 2EQ Room Correction and Speaker SetupMeasurement Positions Using Audyssey 2EQ First Time SetupUsing a Powered Subwoofer Error MessagesTo Retry the Room Correction and Speaker Setup Changing the Speaker Settings ManuallyPress the Setup button Component Video Input SetupDigital Input Setup Followed by the Setup buttonChanging the Input Display Start playback on the source component Select a listening mode and enjoyBasic Operations Basic AV receiver OperationMuting the AV receiver Setting the Display BrightnessUsing the Sleep Timer Basic OperationsAdjusting the Bass & Treble 7Using Headphones Displaying Source InformationSpecifying the Digital Signal Format Using the Music OptimizerAM/FM Frequency Step Setup Listening to the RadioButtons to select 8.Hardware Tuning into AM/FM Radio Stations Listening to the RadioListening to AM/FM Stations Displaying AM/FM Radio Information Presetting AM/FM Stations Deleting PresetsSelecting Presets Positioning the Antenna Setting Up the SiriusConnect Home TunerListening to Sirius Satellite Radio Listening to Sattellite RadioSigning Up for Sirius Satellite Radio Setting the Satellite Radio ModeListening to Sirius Satellite Radio Selecting Sirius Satellite RadioSelecting Sirius Satellite Radio Channels Channel Search ModeDirect Tuning Category Search ModePresetting Sirius Channels See the previous section Deleting PresetsDisplaying Sirius Satellite Radio Information Positioning the SiriusConnect Home TunerParental Lock Changing the PIN Number Putting Your iPod in the Dock UP-A1L Dock for iPodAbout the UP-A1L Dock Compatible iPod modelsControlling iPod UP-A1L Dock for iPodStatus messages Recording Recording from Different AV SourcesRecording the Input Source Selecting on the AV receiver Using the Listening ModesSelecting with the Remote Controller Selecting the Listening ModesUsing the Listening Modes Listening Modes Available for Each Source FormatMono/Multiplex Sources Stereo Source DTS-ES Discrete/Matrix Sources Channel SourcesAbout the Listening Modes Onkyo Original DSP Modes Advanced Setup Common Procedures in Setup MenuSpeaker Settings Sp Distance Speaker Distance Advanced SetupCrossover Crossover Frequency Double BassUse the Down w button to select Ch, and then use the Left Equalizer Equalizer SettingsLeft and Right e/ r buttons to adjust the level at that Level Cal Speaker Levels CalibrationAudio Adjust Settings Audio Adjust Multiplex/Mono SettingsPLIIx/Neo6 Music Mode Settings PLIIx Music 2ch Input Dolby EX Input Signal Setting Audyssey SettingsTheater-Dimensional Setting Hardware Setup Using the Audio Settings Sync Audyssey Dynamic VolumeMusic Optimizer Speaker LevelsPreprogrammed Remote Control Codes Entering Remote Control CodesControlling Other Components Controlling Other Components Resetting the Remote ControllerRemote Control Codes for Onkyo Components Connected via u Resetting the Remote Mode ButtonsControlling a DVD Player, or DVD Recorder Controlling a CD Player, CD Recorder, or MD Player Reverse Play t button Controlling a Cassette RecorderPrevious and Next 7/6 buttons Rewind and Fast Forward 5/4 buttonsControlling an RI Dock When Using an RI DockTroubleshooting Troubleshooting There’s no sound AV receiver’s remote controller doesn’t control your iPodSound changes when I connect my headphones Can’t control other componentsVideo Attenuation Video ATT0 defaultTuner Section SpecificationsAmplifier Section Video SectionCenter Speaker SKC-570 SpecificationsSubwoofer SKW-570 Front Speaker SKF-570Memo Memo 3 4 4 9 3

29344934 specifications

The Onkyo 29344934 is a remarkable piece of audio equipment designed for audio enthusiasts seeking to elevate their listening experience. Known for its high-quality sound reproduction, this model is equipped with a range of features and technologies that cater to both casual listeners and serious audiophiles.

One of the standout characteristics of the Onkyo 29344934 is its advanced sound processing capabilities. It incorporates Onkyo’s proprietary Wide Range Amplification Technology (WRAT), which ensures that audio signals are reproduced with exceptional clarity and minimal distortion. This technology enhances the dynamic range of sound, allowing users to fully appreciate the nuances in their favorite music and movies.

In addition to WRAT, the Onkyo 29344934 supports various audio formats, making it versatile for a wide range of content. Whether streaming music from digital services or playing high-resolution audio files, the Onkyo 29344934 is designed to deliver a rich and immersive auditory experience. Its compatibility with lossless audio formats ensures that enthusiasts can enjoy studio-quality tracks as intended by the artists.

The connectivity options on the Onkyo 29344934 are extensive, providing users with the flexibility to integrate various audio sources seamlessly. With multiple HDMI inputs, users can connect their TVs, gaming consoles, and Blu-ray players. Additionally, Bluetooth technology allows for effortless wireless streaming from smartphones and tablets, catering to the modern needs of consumers who prioritize convenience.

Another key feature of the Onkyo 29344934 is its Dolby Atmos and DTS:X support, which elevates the home theater experience by creating an immersive 3D sound environment. This feature is particularly advantageous for movie buffs who desire a cinema-like experience at home. The unit can easily decode and playback surround sound formats, enabling users to feel as though they are inside the action on-screen.

The Onkyo 29344934 also boasts a user-friendly interface, with an intuitive remote control and an easy-to-navigate on-screen display. This makes it accessible for users of all levels of technical proficiency. Its sleek design allows it to blend effortlessly into any home entertainment setup.

In summary, the Onkyo 29344934 embodies a marriage of cutting-edge technology and user-focused design, making it an ideal choice for anyone looking to enhance their audio experience. From its superior sound processing capabilities to its versatile connectivity options, this model stands out in the competitive audio market, promising exceptional performance for years to come.
Top Page Image Contents