Onkyo 29344934 instruction manual Listening to the Radio, Listening to AM/FM Stations

Listening to the Radio—Continued

Listening to AM/FM Stations

TUNER TUNING

TUNING MODE

With the built-in tuner, you can enjoy AM and FM radio stations and store your favorite stations as presets for easy selection.

Use the [TUNER] input selector button to select “AM” or “FM”.

In this example, FM has been selected.

Band Frequency

(Actual display depends on country.)

Tuning into AM/FM Radio Stations

■ Auto Tuning Mode

1	Press the [TUNING MODE]
	button so that the AUTO indicator
	appears on the display.

2	Press the TUNING Up or Down
	[q]/[w] button.

Searching stops when a station is found.

■Manual Tuning Mode

1Press the [TUNING MODE] button so that the AUTO indicator

disappears from the display.

2	Press and hold the TUNING Up or
	Down [q]/[w] button.
	The frequency stops changing when
	you release the button.
	Press the button repeatedly to change
	the frequency one step at a time.

This model changes FM/AM frequency in 200k/10k (or 50k/9k) Hz steps.

In Manual Tuning mode, FM stations will be in mono.

Tuning into Weak FM Stereo Stations

If the signal from a stereo FM station is weak, it may be impossible to get good reception. In this case, switch to Manual Tuning mode and listen to the station in mono.

Note:

You can also use the remote controller’s Up and Down [q]/[w] buttons to tune the radio.

When tuned into a station, the TUNED indicator appears. When tuned into a stereo FM station, the FM STEREO indicator also appears.

FM STEREO

AUTO

TUNED

49