Onkyo 29344934 Component Video Input Setup, Digital Input Setup, Press the Receiver button

First Time Setup—Continued

Component Video Input Setup

If you connect to a COMPONENT VIDEO IN, you must assign it to an input selector. For example, if you connect your DVD/BD player to COMPONENT VIDEO IN 2, you should assign it to the DVD/BD input selector.

Input selector	Default assignment
DVD/BD	IN1
VCR/DVR	- - - - -
CBL/SAT	IN2
AUX	- - - - -
TV/TAPE	- - - - -
CD	- - - - -
PORT	- - - - -

1	Press the [RECEIVER] button,
	followed by the [SETUP] button.

2 Use the Up and Down [q]/[w] buttons to select “1.Component”, and then press [ENTER].

3	Use the Up and Down [q]/[w]
	buttons to select an input

selector, and use the Left and Right [e]/[r] buttons to select:

IN1: Select if the video component is connected to

COMPONENT VIDEO IN 1. IN2: Select if the video component

is connected to

COMPONENT VIDEO IN 2.

- - - - -:Select if you’re not using the

	COMPONENT VIDEO
	OUT.
4	Press the [SETUP] button.
	Setup closes.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

Digital Input Setup

To enjoy Dolby Digital and DTS, you must connect your DVD/BD player to the AV receiver by using a digital audio connection (coaxial or optical).

Here are the default assignments.

Input selector	Default assignment
DVD/BD	COAX1
VCR/DVR	- - - - -
CBL/SAT	COAX2
AUX	- - - - -
TV/TAPE	OPT1
CD	OPT2
PORT	- - - - -

With this function, you can assign digital inputs to input sources. For example, if you connect your DVD/BD player to DIGITAL IN OPTICAL 1,you’ll need to assign that input (OPT1) to the DVD input source.

You can change the assignments as follows.

RECEIVER

qwer

ENTER

SETUP

1	Press the [RECEIVER] button,
	followed by the [SETUP] button.

42