Onkyo 29344934 Level Cal Speaker Levels Calibration, Equalizer Equalizer Settings, Frequency

Page 72

Advanced Setup—Continued

Unit

feet:

Distances can be set in feet. Range: 1 to 30 feet in 1-foot steps.

 

meters:

Distances can be set in meters. Range: 0.3 to 9 meters in 0.3-meter steps.

Front, Center, SurrRight, SurrBack Right, SurrBack Left, SurrLeft, Subwoofer

Specify the distance from the each speaker to your listening position.

5. Level Cal (Speaker Levels Calibration)

These settings are set automatically by the Audyssey 2EQ™ Room Correction and Speaker Setup function (see page 39).

You can set the volume level of each speaker so that all speakers can be heard equally at the listening position. A pink noise test tone is output by the front left speaker.

Notes:

•Speakers that you set to “No” or “None” in the “3. Sp Config” (page 70) do not output the test tone.

•These settings cannot be changed while a pair of headphones is connected, or speaker set A is off, or speaker set B is on, or the AV receiver is muted.

Left, Center, Right, SurrRight, SurrBack Right, SurrBack Left, SurrLeft, Subwoofer

The levels can be adjusted from –12 to +12 dB in 1 dB steps (–15 to +12 dB for the subwoofer).

6. Equalizer (Equalizer Settings)

These settings are set automatically by the Audyssey 2EQ Room Correction and Speaker Setup function (see page 39). Here you can adjust the tone of individual speakers. To set the volume of individual speakers, see page 72.

Notes:

•You can select: “63Hz”, “250Hz”, “1000Hz”, “4000Hz”, or “16000Hz”. And for the subwoofer, “25Hz”, “40Hz”, “63Hz”, “100Hz”, or “160Hz”.

•While the Direct listening mode is selected, the equalizer settings have no effect.

•The equalizer setting cannot be changed while a pair of headphones is connected, or speaker set B is on.

EQ

Manual: You can adjust the equalizer for each speaker manually. If you select “Manual”,

 

 

continue with this procedure.

 

 

Select a frequency

 

 

 

 

 

 

 

1

Use the Down [w] button to select “Ch”, and then use the Left and

 

 

 

Right [e]/[r] buttons to select a speaker.

 

 

2

Use the Up and Down [q]/[w] buttons to select a frequency. Use

 

 

 

the Left and Right [e]/[r] buttons to adjust the level at that

 

 

 

frequency.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The volume at each frequency can be adjusted from –6 to +6 dB in 1 dB steps.

 

 

 

Tip:

 

 

 

Low frequencies (e.g., 63Hz) affect bass sounds; high frequencies (e.g.,

 

 

 

16000Hz) affect treble sounds.

 

 

 

 

 

 

 

3

Use the Up [q] button to select “Ch”, and then use the Left and

 

 

 

Right [e]/[r] buttons to select another speaker.

Repeat steps 1 and 2 for each speaker.

Speakers that you set to “No” or “None” in the “3. Sp Config” (page 70) do not output the test tone.

Audyssey: The tone for each speaker is set automatically by the Audyssey 2EQ Room Correction and Speaker Setup function. Be sure to select this setting after having performed the Room Correction and Speaker Setup. “Dynamic EQ” and “Dyn Vol” become available (see page 74).

Off: Tone off, response flat (default).

72

Page 71 Page 73
Image 72
Page 71 Page 73
Contents HT-S5200 Important Safety Instructions AvisPrecautions PowerPreventing Hearing Loss Caution Batteries and Heat Exposure WarningSpeaker Precautions Package ContentsPackage Contents Using Two Sets of Speakers Speaker Sets a and BFeatures AmplifierProcessing ConnectionsFeatures Contents Front & Rear Panels Front PanelFront & Rear Panels DisplayRear Panel CBL/SAT VCR/DVR IN/OUTDVD/BD Subwoofer PRE OUTSpeaker Package Subwoofer SKW-570Speaker Package Keyhole slotsSpeaker terminals Remote Controller Controlling the AV receiverRemote Controller Installing the BatteriesAiming the Remote Controller Connecting the AV receiver Enjoying Home TheaterConnecting the AV receiver Speaker ConfigurationSpeaker Connection Precautions Connecting Speaker Set a Connecting Speaker Set BUsing the Rubber Stoppers for a More Stable Platform Using the Floor Pads for SubwooferWall Mounting Connecting Antenna Connecting the Indoor FM AntennaConnecting the AM Loop Antenna Attach the FM antenna, as shownConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaUsing a TV/FM Antenna Splitter About AV Connections Optical Digital Jacks AV Connection Color CodingAV Cables and Jacks Connecting Audio and Video Signals to the AV receiver Which Connections Should I Use?Video Connection Formats Audio Connection FormatsConnecting Components with Hdmi About HdmiAbout Copyright Protection Pass-ThruMaking Hdmi Connections TipConnecting a TV or Projector Video ConnectionAudio Connection HintConnecting a DVD/BD player Connecting a VCR or DVR for Playback Connecting a VCR or DVR for Recording Make the audio connection aSatellite, cable, set-top box, etc Connecting a Camcorder, Game Console, or Other Device Connecting a Portable Audio playerMake the video connection a Make the audio connection a Connecting a CD Player or Turntable CD Player or Turntable MM with Built-in Phono Preamp StepConnecting a Cassette, CDR, MiniDisc, or DAT Recorder Connecting an RI Dock Connecting the Supplied UP-A1L DockNot all iPod models output video If Your iPod Supports VideoConnecting Onkyo u Components Connecting the Power CordAuto Power On/Standby Direct ChangeTurning On the AV receiver Turning On and StandbyUp and Running in a Few Easy Steps Did you connect an Onkyo MD recorder or CD recorder?First Time Setup Audyssey 2EQ Room Correction and Speaker SetupMeasurement Positions First Time Setup Using Audyssey 2EQError Messages To Retry the Room Correction and Speaker SetupChanging the Speaker Settings Manually Using a Powered SubwooferComponent Video Input Setup Digital Input SetupFollowed by the Setup button Press the Setup buttonChanging the Input Display Select a listening mode and enjoy Basic OperationsBasic AV receiver Operation Start playback on the source componentSetting the Display Brightness Using the Sleep TimerBasic Operations Muting the AV receiver7Using Headphones Displaying Source Information Adjusting the Bass & TrebleUsing the Music Optimizer Specifying the Digital Signal FormatAM/FM Frequency Step Setup Listening to the RadioButtons to select 8.Hardware Tuning into AM/FM Radio Stations Listening to the RadioListening to AM/FM Stations Displaying AM/FM Radio Information Presetting AM/FM Stations Deleting PresetsSelecting Presets Setting Up the SiriusConnect Home Tuner Listening to Sirius Satellite RadioListening to Sattellite Radio Positioning the AntennaSetting the Satellite Radio Mode Listening to Sirius Satellite RadioSelecting Sirius Satellite Radio Signing Up for Sirius Satellite RadioChannel Search Mode Selecting Sirius Satellite Radio ChannelsCategory Search Mode Direct TuningPresetting Sirius Channels Deleting Presets Displaying Sirius Satellite Radio InformationPositioning the SiriusConnect Home Tuner See the previous sectionParental Lock Changing the PIN Number UP-A1L Dock for iPod About the UP-A1L DockCompatible iPod models Putting Your iPod in the DockUP-A1L Dock for iPod Controlling iPodStatus messages Recording Recording from Different AV SourcesRecording the Input Source Using the Listening Modes Selecting with the Remote ControllerSelecting the Listening Modes Selecting on the AV receiverUsing the Listening Modes Listening Modes Available for Each Source FormatMono/Multiplex Sources Stereo Source Channel Sources DTS-ES Discrete/Matrix SourcesAbout the Listening Modes Onkyo Original DSP Modes Advanced Setup Common Procedures in Setup MenuSpeaker Settings Advanced Setup Crossover Crossover FrequencyDouble Bass Sp Distance Speaker DistanceEqualizer Equalizer Settings Left and Right e/ r buttons to adjust the level at thatLevel Cal Speaker Levels Calibration Use the Down w button to select Ch, and then use the LeftAudio Adjust Settings Audio Adjust Multiplex/Mono SettingsPLIIx/Neo6 Music Mode Settings PLIIx Music 2ch Input Dolby EX Input Signal Setting Audyssey SettingsTheater-Dimensional Setting Hardware Setup Using the Audio Settings Audyssey Dynamic Volume Music OptimizerSpeaker Levels SyncPreprogrammed Remote Control Codes Entering Remote Control CodesControlling Other Components Resetting the Remote Controller Remote Control Codes for Onkyo Components Connected via uResetting the Remote Mode Buttons Controlling Other ComponentsControlling a DVD Player, or DVD Recorder Controlling a CD Player, CD Recorder, or MD Player Controlling a Cassette Recorder Previous and Next 7/6 buttonsRewind and Fast Forward 5/4 buttons Reverse Play t buttonWhen Using an RI Dock Controlling an RI DockTroubleshooting Troubleshooting AV receiver’s remote controller doesn’t control your iPod Sound changes when I connect my headphonesCan’t control other components There’s no soundVideo ATT0 default Video AttenuationSpecifications Amplifier SectionVideo Section Tuner SectionSpecifications Subwoofer SKW-570Front Speaker SKF-570 Center Speaker SKC-570Memo Memo 3 4 4 9 3

29344934 specifications

The Onkyo 29344934 is a remarkable piece of audio equipment designed for audio enthusiasts seeking to elevate their listening experience. Known for its high-quality sound reproduction, this model is equipped with a range of features and technologies that cater to both casual listeners and serious audiophiles.

One of the standout characteristics of the Onkyo 29344934 is its advanced sound processing capabilities. It incorporates Onkyo’s proprietary Wide Range Amplification Technology (WRAT), which ensures that audio signals are reproduced with exceptional clarity and minimal distortion. This technology enhances the dynamic range of sound, allowing users to fully appreciate the nuances in their favorite music and movies.

In addition to WRAT, the Onkyo 29344934 supports various audio formats, making it versatile for a wide range of content. Whether streaming music from digital services or playing high-resolution audio files, the Onkyo 29344934 is designed to deliver a rich and immersive auditory experience. Its compatibility with lossless audio formats ensures that enthusiasts can enjoy studio-quality tracks as intended by the artists.

The connectivity options on the Onkyo 29344934 are extensive, providing users with the flexibility to integrate various audio sources seamlessly. With multiple HDMI inputs, users can connect their TVs, gaming consoles, and Blu-ray players. Additionally, Bluetooth technology allows for effortless wireless streaming from smartphones and tablets, catering to the modern needs of consumers who prioritize convenience.

Another key feature of the Onkyo 29344934 is its Dolby Atmos and DTS:X support, which elevates the home theater experience by creating an immersive 3D sound environment. This feature is particularly advantageous for movie buffs who desire a cinema-like experience at home. The unit can easily decode and playback surround sound formats, enabling users to feel as though they are inside the action on-screen.

The Onkyo 29344934 also boasts a user-friendly interface, with an intuitive remote control and an easy-to-navigate on-screen display. This makes it accessible for users of all levels of technical proficiency. Its sleek design allows it to blend effortlessly into any home entertainment setup.

In summary, the Onkyo 29344934 embodies a marriage of cutting-edge technology and user-focused design, making it an ideal choice for anyone looking to enhance their audio experience. From its superior sound processing capabilities to its versatile connectivity options, this model stands out in the competitive audio market, promising exceptional performance for years to come.
Top Page Image Contents