Onkyo CR-715DAB instruction manual Connecting Speakers, Connecting Your Speakers

Page 16

Connecting Speakers

Connecting Your Speakers

•Connect the right speaker to the CD receiver’s right (R) SPEAKERS terminals. Connect the left speaker to the left

(L) SPEAKERS terminals.

•Connect the positive (+) terminal on each speaker to the corresponding positive (+) terminal on the CD receiver. Connect the negative (–) terminal on each speaker to the corresponding negative (–) terminal on the CD receiver. Use the red wires to connect the positive (+) terminals.

Right speaker

Left speaker

Red wires	Strip about 15 mm (5/8") of insulation from the ends of the speaker
	cables, and twist the bare wires tightly. Unscrew the terminal. Fully
	insert the bare wire, making sure that it’s touching the threaded shaft in
	the center. Screw the terminal tight.

RL

Speaker cable

SPEAKERS

•Connect only speakers with an impedance of between 4 and 16 ohms. Connecting a speaker with a lower impedance may damage the speaker.

•Be careful not to short the positive and negative wires. Doing so may damage the CD receiver.

•Do not connect both speaker cables to the same L or R terminals (Fig. 1). Do not connect more than two speaker terminals to each speaker (Fig. 2).

Fig. 1

Fig. 2

R	L	L
	R	L

SPEAKERS

16

Image 16

Contents CR-715 CR-715DAB Important Safety Instructions AvisPower PrecautionsInstalling this Unit Features PrecautionsAmpliﬁer CD PlayerBefore Using the CD Receiver Supplied AccessoriesInstalling the Batteries Contents Getting to Know the CD Receiver Front PanelGetting to Know the CD Receiver DisplayRear Panel Remote Controller Using the Remote Controller Disc Notes Supported DiscsDisc Notes MP3Connecting the DAB Antenna CR-715DAB only Connecting AntennasConnecting the Indoor FM Antenna Connecting an Outdoor FM Antenna Connecting AntennasUsing a TV/FM Antenna Splitter Connecting Speakers Connecting Your SpeakersConnecting Other Components Connecting a SubwooferAbout Connections Cables and JacksConnecting Other Components Connecting an Onkyo Cassette DeckConnecting an Onkyo MD recorder What can you do withConnecting an Onkyo CD Recorder CD receiver’s Rear panelConnecting an Onkyo Component with a Digital Audio Output What can you do with ?Connecting a TV HintConnecting a Portable Audio Device Connecting the Power CordPlug the power cord into a suitable wall outlet Setting the Clock with the AccuClock Function First Time SetupTurning Off the AccuClock Function Adjusting the Volume Using HeadphonesBasic Operation Turning On the CD ReceiverAdjusting the Bass and Treble Using the Super Bass FunctionUsing the Direct Function Basic OperationChanging the Input Display Input Source Name AbbreviationsPlaying CDs Selecting TracksPlaying CDs Displaying CD InformationSelecting MP3 Files in Navigation Mode Selecting MP3 Files in All Folder Mode Playing the MP3 Files in Only One Folder Memory Playback DOM indicator appears Random PlaybackRepeat Playback Press the YES/MODE/SHUFFLEPreferences Tuning into FM Radio Stations Adjusting the AntennasTuning into weak stereo FM stations Use the Tuning TUN/TUN buttons to tune into a stationWhat is RDS? Listening to the RadioDisplaying Radio Information Receiving RDSUsing the Auto Tuning Function Manually Listening to DAB Digital Radio CR-715DAB onlySelecting DAB for the Very First Time Press the Band button repeat- edly to select DABSelecting DAB Stations Use the Tuning TUN/TUN buttons to select the DAB sta- tionsDisplaying DAB Radio Information DAB Setup Presetting FM Stations Automatically Auto Preset After Storing Presets You CanPresetting FM/DAB Stations Manually About PresetsTo store as a preset Tune into the station that you wantSelecting Preset Stations Use the Band or InputButtons to select FM, or DAB Listened to the radio will still be selectedNaming Presets Available CharactersCopying Presets Erasing a Preset’s Name Erasing PresetsSetting the Clock Setting AccuClock to Use a Speciﬁc StationSetting the Clock Setting the Clock ManuallyUsing the 12- or 24-hour Format Displaying the Time in Standby ModeUsing the Timers About the TimersUsing the Timers Programming the TimersYou must set the clock before you can program If Clock appears, you need to setIf you selected Once, use the Pre If you selected Every, use the PreIf you selected Days Set, use Press the STANDBY/ON buttonTurning Timers On and Off Checking Timer SettingsAll of the timer’s settings Press Enter repeatedly to seeCanceling the Sleep Timer Using the Sleep TimerChecking the Remaining Sleep Time Troubleshooting PowerAudio CD PlaybackTroubleshooting Remote ControllerTuner External ComponentsTimers Speciﬁcations GeneralAmpliﬁer Section Tuner SectionMemo Memo 3 4 4 3 3