Date/Time Settings, Description | InFocus IN5100 instruction

Date/Time Settings

Item	Description


Current Date	Configures the current date in Year/Month/Day format.

Current Time	Configures the current time in Hour:Minute:Second format.

Daylight Savings Time	Click the [ON] check box to enable daylight savings time and set the following items.
Start-End	Configures the date and time daylight savings time begins/ends.
Month/week/day/hour/minute	Configures the month daylight savings time begins (1~12)/the week of the month (First,
	2,3,4,Last)/the day (Sun-Sat)/the hour (0-23)/minute (0-59)

Time difference	Configures the time difference from GMT (hours:minutes). Set the same time difference as the
	one set on your PC. If unsure, consult your network administrator.

SNTP	Click the [ON] check box to retrieve Date and Time information from the SNTP server and set
	the following items.
SNTP Server IP Address	Configures the SNTP server address in IP format. Consult with your network administrator to
	get the IP address of your SNTP (time/date) server.
Cycle	Configures the interval at which to retrieve Date and Time information from the SNTP server.
	(hours:minutes).

Click the [Apply] button to save the settings.

NOTE:

The new configuration settings are activated after restarting the network connection. The network connection must be restarted when the configuration settings are changed, The network connection can be restarted using [Network Restart] on the main menu.

•If you connect the projector to an existing network, consult a network administrator before setting server addresses.

•To enable the SNTP function, the time difference must be set. SNTP servers report time in Greenwich mean time (GMT)/Universal time; the time difference describes how many hours to add/subtract to get your local time.

•The projector will retrieve DATE and TIME information from the Timeserver and override time settings when SNTP is enabled.